Si PIN photodiode arrays S8558, S15158
1 / 5Páginas

Excertos do catálogo

Si PIN photodiode arrays S8558, S15158 - 1

Surface mountable 16-element arrays The S8558 and S15158 are 16-element Si PIN photodiode arrays in surface mountable chip carrier packages. They can be mounted using solder reflow and used in a wide variety of applications such as spectrophotometers and distance measurement. Photosensitive area: 0.7 × 2.0 mm (× 16 elements) Surface mountable chip carrier package Distance measurement Compatible with lead-free solder reflow High sensitivity Structure Parameter Number of elements Element pitch Element size Package Window material Glass epoxy Silicone resin Absolute maximum ratings (Ta=25 °C) Parameter Reverse voltage Operating temperature*1 Storage temperature*1 Soldering conditions Symbol VR max Topr Tstg *1: o dew condensation. When there is a temperature difference between a product and the surrounding area in high humidity N environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. *2: See P.5. JEDEC J-STD-020 MSL 3 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Ta=25 °C, per element, unless otherwise noted) Parameter Spectral response range Peak sensitivity wavelength Photosensitivity Dark current Temperature coefficient of ID Cutoff frequency Noise equivalent power Terminal capacitance λ=λp VR=10 V VR=10 V, all 16 elements VR=10 V VR=10 V, RL=50 Ω λ=830 nm, -3 dB VR=10 V, λ=λp VR=10 V, f=10 kHz VR=10 V, f=10 kHz, all 16 elements

Abrir o catálogo na página 1
Si PIN photodiode arrays S8558, S15158 - 2

Spectral response Dark current vs. reverse voltage (per element) (Typ. Ta=25 °C) Dark current erminal capacitance vs. reverse voltage 0.1 Cutoff frequency vs. reverse voltage Terminal capacitance vs. reverse voltage (per element) (Typ. Ta=25 °C) Cutoff frequency vs. reverse voltage (per element) (Typ. Ta=25 °C, λ=830 nm, RL=50 Ω) Cutoff frequency Terminal capacitance

Abrir o catálogo na página 2
Si PIN photodiode arrays S8558, S15158 - 3

Dimensional outline (unit: mm) Dimensional outline (unit: mm) Dimensional outline (unit: mm) S8558 0.7 × 2.0 (× 16 elements) photosensitive area Recommended land pattern (unit: mm) 0.6 Recommended land pattern (unit: mm) Silicone resin Tolerance unless otherwise noted: ±0.25 KMPDA0144ED Silicone resin Photosensitive surface 0.7 × 2.0 (× 16 elements) Photosensitive area Photosensitive surface P1.3 × 8= 10.4 ± 0.05 Tolerance unless otherwise noted: ±0.1 Recommended land pattern (unit: mm) S15158 KMPDA0623EB 1. Solder all terminals. 2. Do not make the land area larger than necessary. 3. It is...

Abrir o catálogo na página 3
Si PIN photodiode arrays S8558, S15158 - 4

Standard packing specifications S8558 Packing quantity 100 pcs max./tray Packing state Tray and desiccant in moisture-proof packaging (vacuum-sealed) Reel ing specifications (conforms to JEITA ET-7200) Dimensions 330 mm Electrostatic characteristics Conductive Index mark Embossed tape (unit: mm, material: PS, conductive) Reel feed direction KMPDC0789EA Packing quantity 1000 pcs/reel Packing state Reel and desiccant in moisture-proof packaging (vacuum-sealed)

Abrir o catálogo na página 4
Si PIN photodiode arrays S8558, S15158 - 5

Recommended reflow soldering conditions 300 °C ‧ fter unpacking, keep it in an environment at 5 to A 30 °C and a humidity of 60% or less, and perform soldering within 168 hours. ‧ he effect that the product receives during reflow T soldering varies depending on the circuit board and reflow oven that are used. ‧ hen you set reflow soldering conditions, check W that problems do not occur in the product by testing out the conditions in advance. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ‧ Disclaimer ‧ Surface mount type products Technical information ‧ Si photodiodes...

Abrir o catálogo na página 5

Todos os catálogos e folhetos técnicos HAMAMATSU

  1. FLAT PANEL TYPE

    4 Páginas

  2. SPAD MODULES

    5 Páginas

  3. LIGHTNINGCURE

    29 Páginas

  4. Xenon Flash Lamps

    19 Páginas

  5. NanoZommer series

    8 Páginas

  6. C13410 series

    4 Páginas

  7. C13410-06A

    4 Páginas

  8. PMA-12

    8 Páginas

  9. L12542

    4 Páginas

  10. FLAT EXCIMER

    16 Páginas

  11. L15208-01

    3 Páginas

  12. L15856-01

    3 Páginas

  13. L14001-01

    2 Páginas

  14. L11854-336-05

    2 Páginas

  15. L14351-02

    4 Páginas

  16. GC-113A

    2 Páginas

  17. IMAGEMX2 series

    8 Páginas

  18. ORCA-Fusion BT

    9 Páginas

  19. DIUTHAME

    12 Páginas

  20. J12853

    2 Páginas

  21. J12432-01

    2 Páginas

  22. J10919 SERIES

    2 Páginas

  23. C15780-401

    4 Páginas

  24. H15460-40

    4 Páginas

  25. R14755U-100

    2 Páginas

  26. Si APD S14124-20

    3 Páginas

  27. C13398 series

    5 Páginas

  28. Si APD S14643-02

    6 Páginas

  29. LIGHT SOURCES

    23 Páginas

  30. PHOTOTUBES

    8 Páginas

  31. PSD

    8 Páginas

  32. InGaAs Photodiodes

    20 Páginas

  33. Infrared Detectors

    36 Páginas

  34. Photo IC

    8 Páginas

  35. Image Sensors

    48 Páginas

  36. Si Photodiodes

    48 Páginas

  37. Si APD

    16 Páginas

  38. Photonic Devices

    44 Páginas

  39. IMAGE INTENSIFIERS

    20 Páginas

  40. FLOW CELLS

    4 Páginas

  41. SCANBLOCK C10516

    4 Páginas

  42. UV TRONR DRIVING

    2 Páginas

  43. High sensitivity

    2 Páginas

  44. Si photodiodes

    41 Páginas

Catálogos arquivados