Catálogos >
Goulds Pumps >
NS Series Non-Clog, Solids Handling Pumps

NS Series Non-Clog, Solids Handling Pumps
1 / 12Páginas

Excertos do catálogo

NS Series Non-Clog, Solids Handling Pumps - 1

September 2004 NS Series Non-Clog, Solids Handling Pumps

NS Series Non-Clog, Solids Handling Pumps - 2

NS SERIES Heavy-duty Design Features for Tough Wastewater Services EXTERNALLY ADJUSTABLE ROTATING ASSEMBLY Permits easy renewal of critical operating clearances and pump efficiency. HEAVY-DUTY BEARINGS For superior L10 bearing life. BACK PULL-OUT DESIGN Eliminates the need to remove casing from piping. SEALING FLEXIBILITY A wide range of sealing options are available to suit the application including packing, double mechanical seal, cartridge mechanical seal, or EQUISEAL™ dynamic seal. UNIVERSAL STUFFING BOX Accepts packing or mechanical seals. Makes converting shaft sealing methods in the...

Abrir o catálogo na página 2

NS Series Non-Clog, Solids Handling Pumps - 3

DISCHARGE FLEXIBILITY Tangential discharge for passing solids easily without clogging the nozzle. Discharge nozzle can be rotated to any one of eight positions to suit the piping layout. CASING CONNECTIONS All vent, drain, and gauge connections are standard on A-C non-clog pumps. NON-CLOG IMPELLERS Available in either clockwise or counterclockwise rotation. Designed to pass large, soft, solids with maximum efficiency and without clogging. TAPERED SHAFT Tapered shaft/impeller fit will not loosen and hence reduces vibration. Also makes disassembly much easier than straight shafts. CONTOURED...

Abrir o catálogo na página 3

NS Series Non-Clog, Solids Handling Pumps - 4

Proven Worldwide Installations NS Series pumps are designed to handle wastewater and other non-corrosive liquids with soft solids in suspension. Typical applications include municipal and industrial wastewater treatment, food processing, and storm water run-off. Model NSWV with Tri-base on RAS service. Model NSWV pumps with PEG base installed in a sewage treatment plant in Florida. 54" WSYV pumps in primary influent service. Each pump rated for 69,500 gpm. 24" Model NSSE pumps handling wastewater in Florida. 16" NSY unit on digester service. 4

Abrir o catálogo na página 4

NS Series Non-Clog, Solids Handling Pumps - 6

Sealing Flexibility EQUISEAL™ Dynamic Seal ■ Packing and expensive mechanical seals are eliminated ■ Seal flush is not required thus conserving water and eliminating retreatment costs ■ No metal-to-metal rubbing parts and no critical operating clearances means significantly longer life than other sealing methods ■ Static seals prevent leakage when pump is not operating ■ Packed or mechanically sealed pumps can be easily converted in the field Double Mechanical Seal Packing *Can be used without any external flush. Contact factory with application details. SpiralTrac™ is a registered...

Abrir o catálogo na página 6

NS Series Non-Clog, Solids Handling Pumps - 7

Installation Flexibility Horizontal Vertical Half Pedestal ■ Pump mounted vertically on cast or fabricated half pedestal ■ For use with intermediate drive shafting ■ Prevents expensive motor damage during flooding Full Pedestal ■ Pump mounted vertically on cast or fabricated pedestal for direct motor drive ■ Compact footprint requires less space to install Foot Mounted ■ Pump mounted horizontally on fabricated steel channel baseplate with motor and OSHA guarded coupling PEG Mount ■ Pump mounted vertically on fabricated PEG base for direct motor drive ■ Eliminates natural frequencies...

Abrir o catálogo na página 7

NS Series Non-Clog, Solids Handling Pumps - 9

100 Model NSY/NSYV 134 Features • Horizontal and vertical mounting • Regreasable anti-friction bearings • Packing, mechanical seal, or EQUISEAL™ Dynamic Seal available • Other metallurgies, including stainless steels, available upon request • Bottom suction mount available 228 333 107 184 123 332 122 136 112 165 304 176 168 241 119 126 412 182 132 106 105 101 Materials of Construction Item No. Cast Iron 2 - 3% Nickel Cast iron 100 Casing Part Name Cast Iron (ASTM A48 Class 30) 2 - 3% Ni-Cast iron (ASTM A48 CL. 35B W/ 2-3% Nickel) 101 Impeller 2 - 3% Ni-Cast iron (ASTM A48 CL. 35B W/ 2-3%...

Abrir o catálogo na página 9

NS Series Non-Clog, Solids Handling Pumps - 11

PRO ServicesTM...Extending Equipment Life Product Repair (all types and brands of rotating equipment) PRO Service Centers: • Service Center Repair • Field Service • Parts Supply Worldwide...Wherever You Need Us. Reliability Improvement • • • • Inventory Management Replacement / Exchange Turnkey Repair / Installation Training Optimization of Assets • Predictive Analysis / Condition Monitoring • Root Cause Failure Analysis • Pump & System Assessments • Upgrades - Mechanical & Hydraulic • Maintenance Management / Contract Maintenance • • • • • • Technical Expertise Fast Turnaround Factory...

Abrir o catálogo na página 11