Catálogos >
Gantner Instruments >
Q.bloxx EC D105_v28

Q.bloxx EC D105_v28
1 / 3Páginas

Excertos do catálogo

Q.bloxx EC D105 Digital Output Module The Q.bloxx EC brings the high precision and performance of Q.bloxx to EtherCAT-based applications. Q.bloxx EC measurement modules possess integrated signal conditioning and arithmetic functions, packaged in environmentally secure (up to IP65), DIN Rail mountable enclosures that easily snap together for system expansion. With measurement speeds of up to 100 kHz per channel, short cycle times, and low jitter for accurate synchronization, Q.bloxx EC is the ideal solution for EtherCAT applications. CoE (CAN over EtherCAT) according to Modular Device Profil ETG.5001.1 Configurable PDO Mapping to optimize the data throughput XFC technology for oversampling, oscilloscope function, cycle times 1 ms up to 0.1 ms, oversampling ≤100 Module Configuration via SDO or FoE and alternative via configuration software Modular design for DIN Rail Mounting Key Features 16 Digital outputs status, single bit or bitset Fast response time up to 10 µs per channel High load capacity 30 VDC / 500 mA, short circuit proof 3-Way galvanic isolation 500 VDC group to group, group to power supply, and group to bus

Abrir o catálogo na página 1

Q.bloxx EC D105 Digital Output Module Technical Data Digital Output Channels 16 Mode(s) of operation status Contact open drain p-channel MOSFET Output voltage 12 to 30 VDC (external supply required) Load capacity 30 VDC / 500 mA (ohmic load) Response time 10 µs (>0.5 A) Isolation voltage 500 VDC, group to group, group to power supply, group to bus ¹ 1 noise pulses up to 1000 VDC, continuous up to 250 VDC Communication Interface EtherCAT Electrical standard RS-485, 2-wire Protocols EtherCAT (LVDS) Input Power Input voltage 10 to 30 VDC, overvoltage and overcurrent protection Power...

Abrir o catálogo na página 2

Q.bloxx EC D105 Digital Output Module Oversampling EtherCAT also enables transmitting of very high data rates at low bus cycle by over sampling. In this case, a higher number of values of one channel per PDO transmitted so as to reduce protocol overhead. Example: bus cycle 1 kHz, 100 times over sampling => 100 values are transferred per bus cycle => effective sample rate 100 kHz Ordering Information Article number 529230 Gantner Instruments Austria | Germany | France | Sweden | India | USA | China | Singapore

Abrir o catálogo na página 3

Q.bloxx EC D105_v28 1 / 3Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Gantner Instruments

Q.bloxx EC D105_v28
1 / 3Páginas