Conveyor System X45
1 / 48Páginas

Examples of application areas All types of small products down to 10 mm diameter. Pharmaceutical bottles and perfume bottles. Puck handling of products like test tubes for blood and urine, small bottles, cosmetics. The X45 is a very compact conveyor system for handling small and light products.

X45 Module (merge parallel) X45-X45 kit (merge parallel) See “Configuration X45e mod- See “Configuration X45e kit for ules for X45” on page 77. X45 and X45H” on page 79. X45H-X45H kit (merge parallel) X45H-X45 kit (merge parallel) See “Configuration X45e kit for See “Configuration X45e kit for X45 and X45H” on page 79. X45 and X45H” on page 79. Divert/merge devices Conveyor X45 and X45H The X45 offer includes a range of conveyor modules both for handling products directly on chain or handling X45 standard pucks. The X45H conveyor is high capacity conveyor system for handling small products....

Technical characteristics Beam width Chain width Chain pitch Drive unit capacity Chain tension limit Item width Maximum conveyor length Maximum weight on conveyor Maximum load per 100 mm conveyor length Maximum single item 800 g weight, horizontal transport Conveyor speed Horizontal plain bends: 30°/45°/90°/180° Radius 150 mm Note! Maximum 2 bends/conveyor Horizontal wheel bends No Vertical bends: Note! 2 bends/conveyor (maximum) Electrostatic discharge Standard/Conductive feature (ESD) Example: Max permissible product weight 200 g Max permissible puck weight (base, fixture, product ) Max...

Basic and common guidelines X45 and X45H The following guidelines must be considered when engineering conveyor: 1 Conveyor length Maximum permissible conveyor length: See “Technical characteristics” on page 53. 2 Plain bends Horizontal conveyor modules can include up to maximum two Plain bends 30, 45, 90 or 180° (only X45). Different plain bends can be mixed, the sum of the two bends may not exceed 270°. Horizontal conveyor modules in conductive versions may not exceed 180° Vertical conveyors always include two vertical bends of the same type:5° or 15° 3 Guide rails Guide rails for straight...

Conveyor – introduction The X45 beams are designed for rigidness, smooth running and low noise. The T-slots ensure easy but rigid attachment of accessories such as guide rail brackets. Connecting strip kit XUCJ 50 is placed in the middle of the beam keeping the T-slots free. Cross-section of straight sec- Cross-section of tion conveyor beam with slide straight section conrails for non puck application veyor beam with slide rails for puck application Conveyor – introduction

Conveyor modules X45 Straight conveyor Straight conveyor- Standard conveyor* Straight conveyor- Puck handling* Two bend conveyor- Standard conveyor* XUUC U Two bend conveyor- Puck handling’ XUUC UP *Use online configurator when ordering *Use online configurator when ordering Vertical conveyor Support modules – single and multi-lane Vertical conveyor- Standard conveyor* Vertical conveyor- Puck handling* *Use online configurator when ordering Support modules* Single bend conveyor *Use online configurator when ordering L Minimum clearance distance L1, L2 or L3 Single bend conveyor- Standard...

Chains – introduction X45 XS X65 X65P X85 X85P XH XK Chain types The conveyor chain is designed for smooth running, minimum wear and low noise level at normal speeds. Plain chain Plain chain conductive Friction top chain, conductive Flexible cleat chain Plain chain can be used up to 5°±2° slopes, depending on the friction coefficient between product and chain. Friction top chain increases the friction between product and chain and can often be used for 15° slopes. Flexible cleat chain is used for wedge conveyors elevating products or straight horizontal transfers. -For individual weights up...

Beams Conveyor beam Drill instruction Beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) The beam has the same T-slot as used in the XF structural system see “T-slot dimensions” on page 431. Profile for split conveyor beam Connecting strip kit Aluminium Beam section for chain installation Profile for split conveyor beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Including connection strips and screws Drill instruction, Beam section for chain installation Joint piece Joint piece Aluminium Including M6 screw and locking nut. To connect the Beam section for chain...

Beams (continued) Beam spacer Slide plate Complete kit Note! Recommended distance between Beam spacer 600 mm. XKP Slide plate 5113429 Length 3 m Covering gap between two chains in a function. The slide plate can also be used when handling small non puck products. Cover strip Complete kit Note! Recommended distance between Beam spacer 600 mm. Slide plate This side up when covering gap between friction and standard chain Cover strip for T-slot Length 3 m Polyvinyl chloride, grey ELV This side up when covering gap between 2 equal chains Slide plate 5113221 Covering gap between Friction...

Slide rail The slide rails are designed for long service life, smooth running, low elongation and minimized risk of failure. Several options exist for high performance operation. Slide rail types include • Two slide rail profiles Slide rails are available in two profile designs: Slide rail for non puck-application and slide rail for puck handling. Type H – high wear resistance (standard) All slide rails can be mounted to the conveyor beams without using rivets for anchoring. Slide rails to be used for conveyors for puck handling For straight sections Standard For plain bends (inner and...

Slide rails Slide rail for non puck-application or return side Slide rail Length 25 m PA-PE (standard) (Grey) PE-UHMW (conductive) (Black) Slide/guide rail for puck handling Cover strip Length: 3 m Material: Plastic PA 12 Slide/guide rail Length 3 m PA-PE (standard) (Grey Cover the opening on the side between the chain and beam. Primarily for straight sections and the outer curves, but can also be mounted on inner curves. Apply using Glue tape 3M, see mounting instruction 5497 EN in Technical library. Inner and outer Slide/guide rail for bends, puck handling v Glue tape 3M XUCR 3 HGI...