![FIAM - logo](https://img.directindustry.com/pt/images_di/logo-p/L17524.gif)
Grupo: Fiamgroup
Excertos do catálogo
![Tightening automation - 1](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_1m.jpg)
Tightening automation With the efficiency of pick and place. Automatic screw presenters Screw suction systems • For automatic and manual use
Abrir o catálogo na página 1![Tightening automation - 2](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_2m.jpg)
Tightening systems with automati for very fast and efficient tighteni When carrying out manual assembly with small screws on the bench or an automatic assembly line, tightening time is essential to increase productivity. These automatic screw feed systems significantly reduce cycle times and can be used in both manual pick-and-place and automatic processes. In fact the screws can be picked up easily by a magnetic bit or by a screw suction system, ready for immediate tightening. The models offered provide a flexible solution to most application situations that can arise in normal industrial...
Abrir o catálogo na página 2![Tightening automation - 3](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_3m.jpg)
ic screw presenter: ing. ASSEMBLY EXAMPLE WITH MANUAL PHASES ASSEMBLY EXAMPLE WITH A SCREW PRESENTER TOTAL TIME PIECE LOADING SCREW PICK-UP SCREW POSITIONING TIGHTENING SCREW PICK-UP TRANSFER TIGHTENING SCREW PICK-UP TRANSFER TIGHTENING SCREW PICK-UP TRANSFER TIGHTENING PIECE UNLOADING PIECE UNLOADING SCREW PICK-UP SCREW POSITIONING TIGHTENING SCREW PICK-UP TRANSFER TIGHTENING SCREW PICK-UP SCREW POSITIONING TIGHTENING PIECE LOADING SCREW PICK-UP SCREW POSITIONING TIGHTENING TOTAL TIME TIME SAVED: 4 seconds The great productivity of these systems guarantees a return on the investment in a...
Abrir o catálogo na página 3![Tightening automation - 4](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_4m.jpg)
Manual pick-and-place systems • For magnetisable screws with PHILLIPS or POZIDRIV recesses and lengths up to 18 mm • For straight air and electric screwdrivers with lever start The pick-and-place systems for manual use consist of NJ screw presenters to ensure fast, smooth work cycles, helping to reduce production costs. The benefits: • No manual steps: operators do not have to pick up screws manually and place them on the screwdriver bit, reducing cycle times by over 24%. • Very convenient to use: just pick the screw in the pick-up “well” from the selection channel with the screwdriver,...
Abrir o catálogo na página 4![Tightening automation - 5](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_5m.jpg)
Manual and automatic pick-and-place systems • For screws made of any material, even non-magnetisable with lengths up to 18 mm • For all recess types • For screwdrivers with screw suction systems • For nutrunner motors with screw suction systems and that are installed on slides or robots NJR screw presenters are very versatile because the screw suction system with which the coupled tools must be equipped means they can be used in a multitude of manual and automatic applications. The benefits: • They can be used with any screw type, including those with Torx or hexagonal recesses: the screw...
Abrir o catálogo na página 5![Tightening automation - 6](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_6m.jpg)
Technical features PHILLIPS BITS POZIDRIV BITS For screws with shank Ø mm Phillips screws Pozidriv screws Bit dimensions in mm • 6.35 mm bits with hexagonal drive (ISO 1174) and Phillips/Pozidriv tip SCREW SUCTION SYSTEM For screws with shank Ø mm • With any recess • Special bits with lengths different from those in the drawing To choose the screw suction system and tool be paired with it, see pages 12 onwards. Technical features Models available upon request Standard equipment (provided with the presenter) • Feed voltage: 240 V, 50/60 Hz • Operating voltage:15 Volt c.c. • Brushed DC motor...
Abrir o catálogo na página 6![Tightening automation - 7](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_7m.jpg)
How to choose the screw presenter Check the screw type and geometry: - the shank diameter must be in the range 2 mm to 5 mm - the shank maximum length must be less than/equal to 18 mm Types of screws * Without washer * With washer Choose the model according to the screw diameter Nominal screw Screw diameter diameter Screw head diameter Washer diameter Screw head Screw shank height length Decide if the process is manual or automatic and check whether the screw material is magnetisable or not. ** With flat or oval countersunk head * With double washer Screw size supported (screw diameter) Use...
Abrir o catálogo na página 7![Tightening automation - 8](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_8m.jpg)
Manual Pick-and-place with rotary screw selection system • For exclusively magnetisable steel screws from M2 to M6, with under-head lengths up to 25 mm • For air and electric screwdrivers with magnetised bits and lever start • To pick and place screws with the magnetised bit Manual pick-and-place systems that incorporate OM26-M screw presenters feature a rotary screw selection system that separates the screws one by one and positions them at the pick-up point. The benefits: • Efficient pick-up exploiting the magnetised bit, aided by the pick-up “well”. • Ease of use for the operator, who...
Abrir o catálogo na página 8![Tightening automation - 9](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_9m.jpg)
Automatic Pick-and-Place with rotary screw selection system • For exclusively magnetisable steel screws from M2 to M6, with under-head lengths up to 25 mm • For all recess types • For screwdrivers with screw suction systems • For nutrunner motors with screw suction systems and that are installed on slides or robots OM-26R screw presenters with rotary screw selection system, for positioning at the pick-up point, can be used in automatic pick-and-place processes. The benefits: • Convenient pick-up point on the rotating escape: screws from the linear rail, are placed at the pick-up point one...
Abrir o catálogo na página 9![Tightening automation - 10](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_10m.jpg)
Technical features Models for manual use PHILLIPS BITS POZIDRIV BITS For screws with shank Ø mm Phillips screws Pozidriv screws Bit dimensions in mm • 6.35 mm bits with hexagonal drive (ISO 1174) and Phillips/Pozidriv tip Models for automatic use OM-26R MODELS For screws with shank Ø mm upon request upon request upon request upon request upon request upon request SCREW SUCTION SYSTEM • With any recess • Special bits with lengths different from those in the drawing To choose the screw suction system and tool be paired with it, see pages 12 onwards. Technical features Models available upon...
Abrir o catálogo na página 10![Tightening automation - 11](https://img.directindustry.com/pdf/repository_di/17524/tightening-automation-1073045_11m.jpg)
How to choose the screw presenter Check the screw type and geometry: - the shank diameter must be in the range 2 mm to 6 mm - the shank maximum length must be less than/equal to 25 mm Types of screws * Without washer * With washer Choose the model according to the screw diameter * With double washer Nominal screw Screw diameter diameter ** With flat or oval countersunk head Screw head diameter Washer diameter Screw head Screw shank height length Decide if the process is manual or automatic. The screw must be magnetisable. Screw size supported (screw diameter) Use Screw material Magnetisable...
Abrir o catálogo na página 11Todos os catálogos e folhetos técnicos FIAM
-
Torque readers
8 Páginas
-
A guide to Fiam solutions 2025
188 Páginas
-
Accessories for ergonomic workplace
46 Páginas
-
High-tech automatic tightening solutions
22 Páginas
-
Auto feed tightening module MCA
40 Páginas
-
Air motors
50 Páginas
-
eTensil for manual use
42 Páginas
-
Air angle nutrunners
22 Páginas
-
Aerospace Solutions
42 Páginas
-
Drills-30F
10 Páginas
-
Air grinders and sanders
16 Páginas
-
Hi -tech DC tightening systems
8 Páginas
-
26C Air screwdrivers
20 Páginas
-
15C Air screwdrivers
20 Páginas
-
AM-Automatic nut presenter
4 Páginas
-
Cordless screwdrivers
4 Páginas
-
Air screwdrivers CDE
4 Páginas
-
Air screwdrivers CY, CG 7 to 103 Nm
4 Páginas
-
SPS - Socket Programme Selector
4 Páginas
-
Air nutrunner motors 40 Nm
24 Páginas
-
Air drills
24 Páginas
-
Air tappers
16 Páginas
-
Components for tightening automation
20 Páginas
-
Air screwdrivers 15C
16 Páginas
-
Oil pulse wrenches IHE
4 Páginas
-
Air marking pen
2 Páginas
-
Multispindle tightening units
8 Páginas
-
Assembly with double thread screws
2 Páginas
-
Automatic assembly of plastic chairs
2 Páginas
-
Assembly of boilers components
2 Páginas
-
Fasten sensors on aluminium ramps
2 Páginas
-
Air inserting tool IP900
4 Páginas
-
Rotary Table Assembly Machine
4 Páginas
-
Tightening machine with turntable
4 Páginas