Catálogos >
FIAM >
Fasten automatically bush and studs for car field

Fasten automatically bush and studs for car field
1 / 4Páginas

Excertos do catálogo

Fasten automatically bush and studs for car field - 1

Tightening automation Car components field Customer’s need: To fasten automatically 1 threaded M20 cap complete of washer and 2 M8 pins diameter 8 mm on underside carter (oil pan) of internal combustion engines. Required production rate is 80 pieces / hour. Solution: Fiam manufactured a semi-automatic tightening machine which includes: manual loading and unloading of the component (design of the machine considers that in the future this operation will be made by a robot) automatic tightening of the components automatic management of waste pieces Component area where two pins have to be inserted Working phases Manual loading of the component on a customized jig Once the start is given the jig is moved inside the machine to perform following automatic operations:

Abrir o catálogo na página 1

Fasten automatically bush and studs for car field - 2

Automatic tightening of the CAP and its WASHER 1 feeding unit for caps made up of a stainless steel bowl feeder, a linear rail and a pick & place system at the end of the rail; complete with external ramp for components feeding without need to access to the internal protected area of the machine 1 feeding unit for washers made up of a stainless steel bowl feeder, a linear rail and a pick & palce system at the end of the rail; complete with device for washers feeding without need to stop the machine Automatic tightening unit of the caps made up of: • A double movement fastening slide,...

Abrir o catálogo na página 2

Fasten automatically bush and studs for car field - 3

Pins insertion and pressing 1 pins feeding unit made up of a stainless steel bowl feeder, complete with external ramp for components feeding without need to access to the internal protected area of the machine. Inserting device Pins feeder and external ramp for pins feeder Automatic pin insertion unit made up of: • The pins are selected and separated and then placed on the insertion and pressing points; • DC driven electric motor with 400 Kgs. A capacity of axial thrust, inserts and presses the pin into the underside of the component; • At the same time, in addition to the pin pressing in...

Abrir o catálogo na página 3

Fasten automatically bush and studs for car field - 4

Advantages of the solution: • 100% control of the assembly productive process All operations are in fact controlled and, notably tightenings, carried out according to set parameters, are available with reports that can be processed and printed. January 2014 | Printed on recycled paper for the safeguard of the environment | Copyright Fiam Spa. The unauthorised distribution and/or reproduction of all or part of this publication is strictly forbidden. • A solution guaranteed by Fiam The solution is entirely designed and manufactured by Fiam according to EC standards in regards to safety and it...

Abrir o catálogo na página 4