Auto feed tightening module MCA
1 / 40Páginas

Tightening automation. Putting the innovation into productivity, increasing reliability. Tightening module with automatic screw feeding to be integrated into automatic production systems

TIGHTENING MODULE WITH AUTOMATIC SCREW FEEDING Effective, fast and safe production cycles. Concentrated innovation for a faster, more reliable production process: these are the MCA tightening module. Suitable for large batches of the same screws. They can be integrated into existing production systems such as assembly lines, manipulators, electric Cartesian axes and collaborative robots, in order to obtain complete and independent tightening cycles using a simple external start (from PLC, dual command, start button, pedal, etc.). They offer concrete productivity benefits because:  screws...

For all type of screws metric, self-threading, self-tapping, self-drilling, three-lobe, etc. Perfect integration on any production line: single workstations, turntables, automatic pallet lines MCA on anthropomorphic arm Installation on X,Y and Z axes in order to tighten at different working heights Can be installed on anthropomorphic scararobots and Cobots to obtain versatile solutions, that can always be reconverted and that work safely side by side of operators MCA for automatic lines with pallet transfer Multiple levels of accuracy offered by: air shut-off or DC-driven nutrunner motors,...

Screw feeders They manage the entire working cycle with great flexibility: they manage tightening sequences quickly and easily, customizing them to the different applications. The INTEGRATED PLC governs all machine parameters according to the assembly needs. Fastening slides They ensure a precise approach stroke of the nutrunner motor/ screw-retaining head to the component, guaranteeing high reliability of the assembled product. Can be used on manipulators, electric axes or robots and they withstand important axial thrust Devices for Cobots Designed to be used with collaborative robots with...

• The device is designed to be fixed to the Cobot’s wrist with a bracket and can communicate with network PLC Fastening slides with OFF-SET device COMPACT FASTENING SLIDE FOR SMALL SPACES OR TO TIGHTEN FROM THE BOTTOM TO THE TOP TIGHTENING DEVICES FOR COBOT Available also with “screw at sight” function (SW models) ELECTRIC NUTRUNNER MOTORS ELECTRIC NUTRUNNER MOTORS WITH MECHANICAL CLUTCH AND AUTOMATIC SHUT OFF TPU 2 POWER SUPPLY UNIT WITH TORQUE/ANGLE CURRENT CONTROL ELECTRIC NUTRUNNER MOTORS WITH TORQUE/ANGLE CONTROL BY: - CURRENT CONTROL - BUILT-IN TRANSDUCER AND RESOLVER CONTROL UNIT...

Screw feeders High working autonomy The vibrating bowl of models available, ensure different working autonomies and the vibrator timed system, managed by the PLC, automatically stops screw feeding when not needed thereby reducing the consumption of electricity Selector The high selection speed allows to reach high screw feeding frequencies;t he screw shooting in a closed chamber ensures a low noise level and there are no compressed air dissipations and any screw jam is eliminated No jamming The ‘overload’ photocell makes sure no screws get jammed in the selection duct by emitting a jet of...

EasyDriver ED B screw feeder Feeds the screws optimally and without jamming. Bowl: For screws between 10 and 35 mm in lenght 1 x 240mm Ø bowl feeds an air/electric slide/spindle Upon request: • Low level sensor: device for the bowl feeder indicates when the bowl needs screw reloading. The signal can be managed by the PLC of the tightening system or by external PLC. • Basic structure to support the feeder, equipped with aluminum base plate already prepared with the holes that allow to fix the suitable feeder on it. With aluminum profiles with channels for cables and tube bundles inside the...

EasyDriver ED B 2|1 screw feeder With its dual circular bowls, it can process 2 geometrically similar screws, for example differing in length or made from different materials (e.g. stainless steel / browned steel) to feed a slide (one way). Screw choice is managed by the feeder’s PLC through a selector or by an external signal. Bowl: 2 circular bowls with 240 mm in Ø For screws between 10 and 35 mm in lenght 2|1 = 2 x 240 mm Ø bowls feed an air/electric slide/spindle Upon request: • Low level sensor: device for bowl feeder indicates when the bowl needs screw reloading. For this model:...

EASYDRIVER SCREW FEEDERS FESTO components Stainless steel with plastic top cover Painted steel / aluminum and plastic upper cover Sound absorbing Tube carrying hoses and cables Filter-Regulator-Lubricator unit complete with built-in pressure gauge Electricity consumption, apparent power [VA] With air nutrunner motor With eTensil electric nutrunner motor With 15 MCB electric nutrunner motor With 25 MCB electric nutrunner motor With X-Paq electric nutrunner motor PLC Siemens LOGO! For the flexible and detailed management of the individual features of screw feeder The machine is supplied with...

Interconnectivity: a key element for Industry 4.0 Not just tightening reliability, in-process checks and planning for any possible operating situation, but above all interaction with the plant management systems. MCA tightening modules can be managed remotely just using freely programmable I/O signals or via the Modbus TCP/IP protocol; they can also interface with line PLCs and various devices, interacting for example with: • Bar Code reader • Conveyor belt • Workpiece clamping jig activation/ deactivation systems • Signalling and monitoring mechanisms such as LEDs, part counters, light...

Fastening slides COMPACT AND VERSATILE. IDEAL FOR EVERY APPLICATION. Fastening slides are entirely designed and manufactured by Fiam with high quality materials, guaranteeing very high reliability and long life time, also in presence of high production rates. Their movement ensures a perfect approach stroke of the nutrunner motor/screwretaining head to the part being assembled. Also suitable for applications with several tightening points with very close centreto-centre distances (min. 41 mm for SM15 models. min. 51 mm for SM 20 models). On request, offset devices are available that can...