Catálogos >
ENSTO >
Products tested according to EN 50397-2 standard

Products tested according to EN 50397-2 standard
1 / 8Páginas

Excertos do catálogo

Products tested according to EN 50397-2 standard - 1

Saves Your Energy Watertight Overhead Line Accessories Reliability for covered conductors Products tested according to EN 50397-2 standard

Abrir o catálogo na página 1

Products tested according to EN 50397-2 standard - 2

Standard EN50397-2 requires more New international overhead line standard EN50397-2 defines test requirements for the accessories used with covered conductors (PAS/BLL), such as tension clamps, suspension clamps, branching, arc protection, temporary earthing and hot line connectors. EN 50397-2 – more demanding, more extensive EN 50397 standard defines the requirements for covered conductors, EN 50397-2 defines, for its part, requirements for accessories used with these conductors. Compared to earlier national standards, EN 50397-2 is substantially more demanding and covers the accessories...

Abrir o catálogo na página 2

Products tested according to EN 50397-2 standard - 3

Ensto’s watertight medium voltage solution Reliability for electricity distribution The new standard required Ensto to set more focus on product development. This resulted in a more reliable product family. Ensto offers accessories tested according to the EN 50397-2 standard for medium voltage covered conductors. The new accessories add corrosion resistance of installations and lengthen their lifecycle also in demanding circumstances. Ensto’s accessories are watertight and tested in co-operation with SGS Fimko Solution that protects the nature Animals cause many electricity breakages by...

Abrir o catálogo na página 3

Products tested according to EN 50397-2 standard - 4

Tension clamp for covered conductors PAS/BLL AlMgSi and for insulated messengers of aerial MV cables like AHXAMK-WM3 (Multi-wiski). The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. Clamps SO255.2 and SO 256.2 are equipped with an adapter for hoist hook. Product code Substitutes product Watertight tension clamp Watertight tension clamp Watertight tension clamp Watertight tension clamp Suspension clamp with pulley for covered conductors PAS/BLL AlMgSi and for insulated messengers of aerial MV cables like AHXAMK-WM3 (Multi-wiski)....

Abrir o catálogo na página 4

Products tested according to EN 50397-2 standard - 5

The connector SEW20.1 includes an arc protection horn and is used for arc protection for covered conductors. The connector SEW20.2 includes an Al-thread to connect the connector to the neck of the insulator. The length of 25 mm² Al thread is 2.1 m. SEW20.3 is used as a temporary earthing connector where the arc protection devices SE20.1 or SE20.2 are not present. The connector SEW20.3 includes an arc protection horn suitable for use with temporary earthing devices with screw fixing. The connector has a place for an Al-thread, so it also works as an arc protection device. Tested short...

Abrir o catálogo na página 5