1056F
1 / 4Páginas

Excertos do catálogo

TECHNICAL SPECIFICATIONS 1056F SIDE VIEW DIAGRAM • Maximum Vertical Reach 96 729.2 m • Working Area 180 Degrees Standard (360 Optional) • Winch Bare Drum Pull 12,800 lbs/5,806 kg • Powered Boom Sections • Overall Height • Operator Controls • Outrigger Type Front • Outrigger Spread Front • Outrigger Type Rear • Outrigger Spread Rear Dual Operator Standup EQUIPMENT COMPANY Elliott Equipment Company Email: sales@elliottequip.com

Abrir o catálogo na página 1

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Crane Capacity: 20,000 lbs at five feet load radius. one set of underslung “A” auxiliary outriggers with a 10’4” span. Maximum Tip Height: 66’ height (96’ with optional 30’ jib) Frame: Full length, all welded rigid 4-plate design sub-frame. Sub-frame allows for bolt-on addition of 16’ bed. Control Console: Dual operator standup control stations equipped with four single axis control levers for the main crane controls. Operator station includes bubble level gauge, engine start/ stop switch, signal horn button, variable speed foot throttle,...

Abrir o catálogo na página 2

TECHNICAL SPECIFICATIONS MAXIMUM LIFTING CAPABILITIES EQUIPMENT COMPANY RANGE DIAGRAM LOAD RADIUS FROM CENTERLINE OF ROTATION IN FEET ALLOWABLE LINE PULL - DO NOT DEADHEAD LINE BLOCK AGAINST BOOM TIP WHEN EXTENDING BOOM. - KEEP AT LEAST 5 WRAPS OF LOADLINE ON THE WINCH DRUM AT - USE ONLY 9/16' DIAMETER WIRE ROPE, AS SPECIFIED BELOW, WITH THE PROPER BREAKING STRENGTHS - ANTI-TWO-BLOCK SYSTEM MUST BE IN GOOD OPERATING CONDITION BEFORE OPERATING CRANE. SEE OPERATION & SAFETY MANUAL. -MAXIMUM CAPACITY WITH DEDUCTIONS FROM RATED LOADS FOR HANDLING DEVICES SUPPLIED BY ELLIOTT EQUIPMENT CO,...

Abrir o catálogo na página 3

TECHNICAL SPECIFICATIONS CHASSIS SPECIFICATIONS Frame Section Modulus Front Axle Gross Weight Rating Rear Axle Gross Weight Rating Integral Front Frame Rails Required for Front Stabilizer Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. *Minimum chassis weight is required to meet 85% stbility requirements. OPTIONS Radio Remote Control Interference protected radio remotes let you get closer to your work and have full control over your machine. Tool Boxes Optional tool boxes and bed...

Abrir o catálogo na página 4

1056F 1 / 4Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Elliott Equipment Company

1056F
1 / 4Páginas