Catálogos >
eddylab GmbH >
LVDT Inductive Transducer SLX series

LVDT Inductive Transducer SLX series
1 / 8Páginas

Excertos do catálogo

LVDT Inductive Transducer SLX series - 1

SLX SERIES | LVDT Perfectly adapted to the environmental conditions in pharmceutical, medical and food industry applications. ■■ Measurement ranges 10...300 mm ■■ Linearity up to ±0,10 % of full scale ■■ High protection class IP68/IP69K ■■ Sensor working temperature up to 200 °C ■■ High resistance to aggressive media ■■ Custom

Abrir o catálogo na página 1

LVDT Inductive Transducer SLX series - 2

2 TECHNICAL DATA I SLX SERIES LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature and pressure ranges,as well as high accelerations and measuring cycles. The SLX-series is based on the rugged SL-series and is perfectly adapted to the environmental conditions in pharmceutical, medical and food industry applications. Today CIP and SIP („clean in place", ..sterilisation in place") are state-of-the-art processes to ensure a hygienic production, starting from grade „clean" up to „aseptic". Therefore all...

Abrir o catálogo na página 2

LVDT Inductive Transducer SLX series - 3

SLX SERIES | CHEMICAL RESISTANCE CHEMICAL RESISTANCE MEDIUM acetic acid + hydrogen peroxide ammoniac ammonium chloride ammonium hydroxide caustic soda citric acid formic acid hydrogen peroxide peracetic acid hypochloric acid sodium hypochlorite phosphoric acid * possible pitting corrosion Information about further chemicals on request.

Abrir o catálogo na página 3

LVDT Inductive Transducer SLX series - 4

4 TECHNICAL DRAWINGS I SLX SERIES TYPE: ROD END BEARINGS OPTION: WIPER Sensors with guided push rod (type „SG") or rod end bearings („G") can be equipped with a double wiper ring that combines wiping and sealing to prevent the penetration of dust, dirt and metal swarf and fluids into the sensor. The displacement speed of the push rod is limited to 4 m/s.

Abrir o catálogo na página 4

LVDT Inductive Transducer SLX series - 5

AC-OUTPUT CABLE ELECTRONICS KAB FUNCTION If not specified otherwise the cable electronics is placed at 1 m from the end of the cable. 1— 13 current output - 12 voltage output 11 GND (signal) The external electronics IMCA is designed to be installed in switch cabinets (Din-rail mounting). The connection to the sensor is conducted as connector with push-in spring connection. * Terminals 1 and 7 are internaNy connected. At harsh EMC environments, it is possible to install the electronics at a max. distance of 100 m in a switch cabinet. A twin twisted pair cable (4-cores, minimum cross section...

Abrir o catálogo na página 5

LVDT Inductive Transducer SLX series - 6

6 CABLE BREAK DETECTION | SLX SERIES ADJUSTMENT OF ZERO POINT AND GAIN (OPTIONAL) Each sensor, manufacted by eddylab, is basically adjusted and calibrated. You will receive a traceable calibrated measurement equipment, adjusted and tested in the company‘s own high-end calibration laboratory, and a calibration certificate. Please note: If the zero point or gain is changed the calibration certificate will lose validity. The potentiometers shall be protected by a label against unauthorised access. In some cases, it is necessary to adjust the zero point and gain, e.g. with hydraulic cylinders...

Abrir o catálogo na página 6

LVDT Inductive Transducer SLX series - 7

SLX SERIES I ORDER CODE 7 ORDER CODE SENSOR SLX X-X-X-XXXX free core unguided push rod guided push rod rod end bearings (c) cable KR = radial cable |d) cable length / type S2: sensor with cable output, open cable end (for IMCA) D = PTFE-UL cable 2 m F = PTFE-UL cable 10 m S3: sensor with cable output for KAB K = PTFE-UL cable 2 m M = PTFE-UL cable 10 m 4e) linearity 1 = 0,30 % (standard) temperature range 1 = -40... + 150 °C (standard) (g) push rod sealing 1 = - (standard) 2 = wiper ring (option W) ORDER CODE ELECTRONICS IMCA-24V- X HUM_ KAB: type of cable / length E1: for sensor with cable...

Abrir o catálogo na página 7