A36, A58 Incremental Encoders
1 / 9Páginas

Content: Technical Data A36 Technical Drawing A36 Technical Data A58 Technical Drawing A58 Digital Output & Connection Accessories Order Code Series A36, A58 Key-Features: - Incremental output A/B-pulses - Housing diameter 36 mm or 58 mm - Protection class IP64, solid shaft version also IP67 - Output frequency up to 300 kHz - Maximum rotation speed 12.000 rpm - Torque: 0.05 to 0.5 Nm - Aluminium housing - Customised versions available

Shaft diameter Through hollow shaft / Hollow shaft Maximum rotation speed [U/min] 12000,00 Maximum shaft load radial 40 N, axial 25 N radial 45 N, axial 30 N Shaft material high grade steel brass Protection class IP64, optional IP67 (max. revolution 50 % reduced) IP64 Housing material Aluminium Aluminium * other resolutions on request

TECHNICAL DRAWING A36 Solid shaft, connector output M12, radial Solid shaft, connector output M12, axial Trough hollow shaft / hollow shaft, cable output, radial Hollow shaft, cable output, axial

Hollow Shaft Shaft diameter Maximum rotation speed [U/min] Maximum shaft load Moment of inertia [kgm²] Shaft material high grade steel high grade steel Protection class IP64, optional IP67 (max. revolution 50 % reduced) Shock resistance Vibration resistance Housing material available resolutions [pulses/turn]* * other resolutions on request Solid shaft, connector output, radial, M23, 12-pole Solid shaft, connector output, radial, M12, 8-pole Solid shaft, connector output, axial, M23, 12-pole Solid shaft, connector output, axial, M12

TECHNICAL DRAWING A58 Solid shaft, cable output, radial Solid shaft, cable output, axial Synchro flange (measurements for connector and cable output please see versions with solid shaft) Hollow shaft, connector output radial M23, 12-pole (measurements for connector output radial M12, 8-pole, see page 4) Hollow shaft, cable output radial

Electrical Data Power supply Current consumption without load Max. load / channel A36 Max. load / channel A58 Max. pulse frequency A36 Max. pulse frequency A58 Min. signal level high Max. signal level low DIGITAL OUTPUT, INCREMENTAL Line Driver L, RS422 (TTL-compatible) 5 VDC, ±5 % typical 70 mA, max. 100 mA ±10 mA ±20 mA 125 kHz 300 kHz 2.5 V 0.5 V Push Pull G 8...30 VDC typical 80 mA, max. 150 mA ± 30 mA ± 30 mA 100 kHz 300 kHz UB - 3 V 2.5 V Sensor Recommended circuit Connection Protection class Max. line length connector 8-pole/ 12-pole anticlockwise, cable output 2 m IP65, optional...

IP67 (for A58) Please chose IP67 if the sensor is completely immersed in water (temporarily). Please bear in mind that this option implicates a higher starting torque due to the specific sealing. The maximum torque is reduced to 50% of the specified value. This option is available for series A58 only. Extended connector cable for cable output The cable length for sensors with cable output is 1.5 m standard. Other cable lengths are available on request. ACCESSORIES Mounting excentric kit - BX36 and BX58 The encoder can be mounted with the excentrics. The kit includes 3 excentrics and 3...

ACCESSORIES Digital display- REX-D Operation modes: • High speed position and event counter (100 kHz) • Tachometer, frequency meter • Baking time and processing time indicator (reciprocal speed) • Timer, stopwatch • Speed display from transition time between start and stop impulse • Additional functions: linearisation, brightness control, digital filter etc. For further information please see the WAY-DS data sheet. Shaft version Solid shaft Through hollow shaft Hollow shaft Standard IP64 IP67 (only for solid shaft versions) Connection Shaft diameter Solid shaft: 6 mm Through hollow shaft,...

A36-H, A36-SH Through hollow shaft, hollow shaft A58-W, A58-WY Solid shaft (clamping- or Synchro fhnge) Cable with connector M12, 8-pole Mounting excentric kit K8P5M-SW-M12 5m, connector, angular, M12 REX-D digital display (see separate data sheet) Connector, M12, 8-pole Extended connector cable for axial/ radial cable output KA/ KR D8-G-M12-S connector, M12, straight Kabel-PVC-36 1 for each additional meter (for series A36) D8-W-M12-S connector, M12, angular Kabel-PVC-58 1 for each additional meter (for series A58) Subject to change without...