AT10.1 - AT30
1 / 1Páginas

Excertos do catálogo

To Order Call Toll Free: AT10.1 / AT30 Microprocessor Controlled Battery Chargers Product Overview Stationary float battery chargers and rectifiers are produced with a combination of advanced technology microprocessor control and performance-engineered modular construction. Chargers are easy to set-up, operate, and maintain. Chargers are customized based on current and voltage requirements. All stationary float battery chargers have a five year warranty - providing unbeatable quality and protection. Stationary float battery chargers are commonly used in the following industries: utilities & telecommunications, manufacturing, uninterrupted power systems (UPS), transportation, and many more. 5 Year Product Warranty Universal main control board operates in any AT Series charger Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure, High VDC, Low VDC, Positive(+) and Negative(-) ground fault AC input and DC output circuit breakers High DC voltage shutdown Forced load share during parallel operation Front panel controls can be disabled for security Current Ratings: 110% rated current at maximum equalize voltage at 50 ºC (122 °F) 110% rated current at maximum equalize voltage at 50 ºC (122 °F) ±0.25% for line, load and temp. variations ±0.25% for line, load and temp. variations Input Voltage Tolerance: Input Frequency Tolerance: Efficiency: Continuous Rating: Current Limit Adjust Range: Voltage Regulation: Electrical Noise: Surge Withstand Capability: Operating Environment: Ambient Temperature: -18 – 50 °C (0 – 122 °F) Relative Humidity: 95% Battery Test Equipment Battery Chargers Ambient Temperature: -18 – 50 °C (0 – 122 °F) Relative Humidity: 95% Description Single-Phase Battery Charger with 12, 24, 48, 130 VDC & 6 – 100 ADC Output 3-Phase Battery Charger with 12, 24, 48, 130 VDC & 25 – 1,000 ADC Output

Abrir o catálogo na página 1