ESET Series: Overview
1 / 6Páginas

Excertos do catálogo

Electrical Slip Rings ESET Series: Overview 100Base-T / 1000Base-T Ethernet Cables Available Splash Seals for Dust and Moisture T568B Wiring Terminated With RJ45 Connectors 1.5″ Inch Thru-bore for Shaft Mounting Fully Compliant With IEEE 802.3 Formats Unique Fiber Brush Contact Technology Low Contact Force per Fiber Compatible With a Range of Data Bus Protocols The ESET Series Ethernet thru-bore slip ring is a rotating assembly used to transfer power, control circuits, or data (analog / digital) from stationary inlets to rotating outlets. ESET Series slip rings feature a 1.5 inch thru-bore for shaft mounting and provide 100Base-T or 1000Base-T Ethernet connections terminated with RJ45 connectors. The ESET Series incorporates low-wear, ﬁber brush contacts that do not require lubrication. Standard models are available in 4, 8, 14, 20 and 22 circuits. For Catalogs, Brochures, Models and Drawings visit www.dsti.com/downloads Operating Speed (max.) Data Speed (max.) Standard Circuit Options Voltage [AC/DC] (max.)* Amps Lead Gauge (AWG) Wire Material Electrical Noise (max.) Contact Material Temperature Range *600V max on 16 AWG power circuits. 240V max on Ethernet cable. DID YOU KNOW? DSTI slip rings can be purchased online at store.dsti.com |Electrical Slip Rings Electrical Slip Rings store store.dsti.com | web www.dsti.com | phone 866.700.3784 |www.dsti.com | store store.dsti.com Dynamic Sealing Technologies, Inc | phone 866.700.3784 | web Dynamic Sealing Technologies

Abrir o catálogo na página 1

Electrical SlipSlip Rings Electrical Rings ESET Series: Dimensions 36" [914 mm] Ø J number of circuits K continuous amps Set-screws for shaft mount (2x) *100BaseT & 1000BaseT (24 gauge / twisted pair) Ethernet circuits can also be used for other data/signal types Dynamic Sealing Technologies, Inc | phone 866.700.3784 | web Dynamic Sealing Technologies, Inc 2 | Electrical Slip Rings

Abrir o catálogo na página 2

Electrical SlipSlip Rings Electrical Rings Wiring Color Codes: ESET Series ESET4 Tag # 1 Description/Awg 100_T/24/ Twisted Pair *24 AWG 100_T = 2 amps max signal; CAT 6 Cable Description/Awg 100_T/24/ Twisted Pair See Ethernet Plug Wiring on Page 25 WHT-RED WHT-ORG Dynamic Sealing Technologies, Inc | phone 866.700.3784 | web Dynamic Sealing Technologies, Inc 3 | Electrical Slip Rings | phone 866.700.3784 | web www.dsti.com | store store.dsti.com www.dsti.com | store store.dsti.com Electrical Slip Rings | 23

Abrir o catálogo na página 3

Electrical Slip Rings Wiring Color Codes: ESET Series ESET8 Tag # 1 Description/Awg 1000_T/24/ Twisted Pair See Ethernet Plug Wiring on Page 25 *24 AWG 1000_T = 2 amps max signal; CAT 6 Cable Description/Awg 1000_T/24/ Twisted Pair Description/Awg 1000_T/24/ Twisted Pair WHT-RED WHT-ORN WHT-GRN WHT-BLU WHT-GRN WHT-BLU |Electrical Slip Rings Electrical Slip Rings WHT-GRY WHT-BLKBRN store store.dsti.com | web www.dsti.com | phone 866.700.3784 |www.dsti.com | store store.dsti.com Dynamic Sealing Technologies, Inc | phone 866.700.3784 | web Dynamic Sealing Technologies, Inc

Abrir o catálogo na página 4

Electrical SlipSlip Rings Electrical Rings Ethernet Plug Wiring: 4-Wire* Color Ethernet Plug PIN Numbers shown on this page are different than Wire Tag Numbers. *RJ45 Plug Ethernet Plug Wiring: 8-Wire* Color WHT-ORN Dynamic Sealing Technologies, Inc | phone 866.700.3784 | web Dynamic Sealing Technologies, Inc 5 | Electrical Slip Rings | phone 866.700.3784 | web www.dsti.com | store store.dsti.com www.dsti.com | store store.dsti.com Electrical Slip Rings | 25

Abrir o catálogo na página 5

Electrical Slip Rings Installation & Mounting PREPARATION: Remove the slip ring from the shipping container. Inspect the entire assembly, including wire leads to make sure there is no visual damage that occurred during transport. RECOMMENDED INSTALLATION PRACTICE: Because of possible geometric mismatching between the customer’s application and the slip ring, “hard mounting” of both ends of the slip ring (i.e., securing the rotor and stator such that there is NO ﬂoating during operation) is not recommended and may cause premature failure. THROUGH BORE SLIP RING, SHAFT MOUNT: Position the...

Abrir o catálogo na página 6