

Excertos do catálogo

SWITCHES & POSITION TRANSMITTERS Design & Construction Position switches can be ordered separately or combined with a position transmitter in one enclosure. They can be mounted directly to DeZURIK valve actuators and to positioners. The enclosure is epoxy coated, anodized aluminum. The explosion proof, corrosion resistant and watertight enclosure is available in Nema 1, 3, 4, 4X, 5, 6, 7, 9, 12 & 13 ratings. A screw-on cover allows easy access to adjust switch settings. Settings of less than 1° are easily accomplished with a hex key wrench. As standard, the enclosure is now equipped with two conduit connections. Open and closed position is prominently displayed in a wide angle viewing area. A prewired and labeled terminal strip enables quick, convenient attachment of field wires. Mechanical Switches The two SPDT or four SPDT switches are rated at 10 amps at 125/250 VAC and 0.5 amps at 120 VDC. The top switch is set to indicate the fully closed position and the bottom switch the fully open position. Proximity Switches The proximity switch is rated at 0.3 amps at 120 VAC and 0.2 amps at 30 VDC. The top switch indicates the valve is in the closed position and the bottom switch indicates the valve is in the open position. Order Code Description Order Code Valve/Actuator Assembly Separate Item Four SPDT Two SPDT & Position Transmitter Valve/Actuator Assembly Two SPDT & Position Transmitter Separate Item Position Transmitters The position transmitter provides a 4-20 mA signal that can be reversed. Operating life is 2,000,000 cycles. Recommended power supply is 24 VDC, 50 mA min. Maximum load: 700 ohms. Order Code Description Separate Item Position Transmitter Valve/Actuator Assembly SEHPT
Abrir o catálogo na página 1
Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: www.dezurik.com E-Mail: info@dezurik.com 250 Riverside Ave. N. Sartell, Minnesota 56377 • Phone: 320-259-2000 • Fax: 320-259-2227 DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by DeZURIK, Inc. Certified...
Abrir o catálogo na página 2Todos os catálogos e folhetos técnicos DeZURIK
-
DeZURIK BALANCING VALVES
2 Páginas
-
DeZURIK PUMP CHECK VALVES
10 Páginas
-
PFW VALVES
16 Páginas
-
PTW/PFW PLUG VALVES
4 Páginas
-
PEC ECCENTRIC
4 Páginas
-
P200
2 Páginas
-
4VG63
2 Páginas
-
HPU-DHS
2 Páginas
-
ECB-CP
4 Páginas
-
APCO Air Valve Guide 610
12 Páginas
-
APCO Check Valve Guide 769
12 Páginas
-
Hilton Fabricated and Custom Valves
8 Páginas
-
APCO Industrial Check Valves
8 Páginas
-
Valve Selection Guide
28 Páginas
Catálogos arquivados
-
KGC Knife Gate Valves
6 Páginas
-
PowerRac Techincal
8 Páginas
-
BHP Techincal
16 Páginas
-
BRS Technical
18 Páginas
-
KGU Technical
12 Páginas
-
VPB Technical
14 Páginas
-
DeZurik Valve Selection Guide
20 Páginas
-
PowerRac Actuator
4 Páginas
-
BHP High Performance Butterfly Valve
8 Páginas
-
KGC
6 Páginas
-
KGN
8 Páginas
-
Maxum RCV
16 Páginas
-
PEC
4 Páginas
-
VPB
8 Páginas