Catálogos >
Deltrol Controls >
D-70 D-Frame Solenoid

D-70 D-Frame Solenoid
1 / 4Páginas

Excertos do catálogo

roc Deltrol CONTROLS D-FRAME SOLENOID Two position linear solenoid with D-frame construction. Features Balance of cost and performance Օ AC solenoids and DC solenoids available UL approval on many models Coil Voltages 6, 12, 24, 110 VDC Coil Power 13 Watts Continuous, 48 Watts Intermittent, 130 Watts Pulse Coil Termination Wire leads (standard) Duty Cycle Continuous, intermittent and pulse duty available (see standard part numbers on page 4) Coil Treatment Tape wrapped Insulation Class Class A Rating - 105°C (221°F) Max. (standard) Class B Rating - 130°C (266°F) Max. (optional) Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Spթcifications Size 2.625" (L) x 1.562" (W) x 1.828" (H) (See page 2 for dimensional drawing) Forces See force curves on page 3 Plunger Diameter 0.500" Plunger Guide Material Plastic Mounting 6X #8-32 UNC-2B Mounting Holes Weight Plunger - 1.92 oz., Total - 19 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approval UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/08/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com

Abrir o catálogo na página 1

D-70 @ Deltrol Force Curves DC Continuous Duty - 13 Watts 0 .2 A .6 .3 1.0 stroke in inhes DC Intermittent Duty - 48 Watts 0 .2 .4 .6 .8 1.0 stroke in inches DC Pulse Duty - 130 Watts 1-1-1-ri-1-1痗r 9 -2 .4 .6 .B 1.0 Standard intermittent duty cycle at nominal voltage is 25%, with three (3) minutes maximum "ON" and nine (9) minutes minimum "OFF" in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". NOTE: Approx 36 sq. in. Heat Sink Required Specifications subject to change without notice 3 of 4 Rev 07/08/11 ©2011 Deltrol Controls - A...

Abrir o catálogo na página 3

D-70 @ Deltrol Standard Part Numbers Parts No. Voltage Duty Cycle Power Resistance (Ohms) Operation Typical Force (oz). 100% Voltage, 77° F, Stroke @ 0.000" 0.125" 0.250" 0.500" 0.750" 50046-80 6 VDC Continuous 13 Watts 2.75 Pull 150 79 62 30 15 50046-81* 12 VDC 11 50046-83* 24 VDC 44.3 50046-93* 110VDC 940 50031-80 6 VDC Intermittent 48 Watts 0.75 Pull 211 130 112 82 50 50031-81* 12 VDC 3.0 50031-83* 24 VDC 12.0 50031-93* 110VDC 254 53714-81 12 VDC Pulse 130 Watts 1.1 Pull 247 180 165 135 100 53714-83 24 VDC 4.5 53714-93 110VDC 92 (*) Normally Stocked Non stocked items require a minimum...

Abrir o catálogo na página 4

D-70 D-Frame Solenoid 1 / 4Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Deltrol Controls

D-70 D-Frame Solenoid
1 / 4Páginas