
Excertos do catálogo

D-4 Deltrol ^ CONTR D-FRAME SOLENOID Two position linear solenoid with D-frame construction. Features Balance of cost and performance Օ AC solenoids and DC solenoids available Encapsulated coils on most models Օ UL approval on many models Electrical Spcifications Coil Voltages 6, 12, 24, 120, 240 VAC | 6, 12, 24, 110 VDC Coil Power 10 VA Continuous, 59 VA Intermittent, 100 VA Pulse, 11.5 Watts Continuous, 47 Watts Intermittent, 105 Watts Pulse Coil Termination .187" Quick Connect Terminals (standard) .250" Quick Connect Terminals (optional) Wire leads optional with tape wrapped coil Duty Cycle Continuous, Intermittent and pulse (see standard part numbers on page 4) Coil Treatment Encapsulated (tape wrap optional) Insulation Class Class A Rating - 105°C (221°F) Max. (standard) Class F Rating - 155°C (311°F) Max. (optional) Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 1.996" (L) x 1.437" (W) x 1.625" (H) (See dimensional drawing on page 2) Forces See page 3 for force curves Plunger Diameter 0.4375" Plunger Guide Material Plastic Mounting 8X #8-32 UNC-2B Mounting Holes Weight Plunger - 1.63 oz., Total - 12 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approval UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130, S130D, S130D1, S155D All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/08/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com
Abrir o catálogo na página 1
D-4 Deltrol CONTR Force Curves AC Continuous Duty - 10 VA 140 DC Continuous Duty - 11.5 Watts E 50 .4 5 .6 stroke in inches .4 .5 .6 stroke In incnes AC Intermittent Duty - 59 VA "T DC Intermittent Duty - 47 Watts .4 .5 .e stroke in inches .4 .S .6 stroka In inches AC Pulse Duty- 100 VA DC Pulse Duty - 105 Watts 140 120 100 « 80 .4 .5 .6 stroke in inches .4 .5 .6 stroke in inches Standard intermittent duty cycle at nominal voltage is 25%, with three (3) minutes maximum "ON" and nine (9) minutes minimum "OFF" in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds "ON"...
Abrir o catálogo na página 3Todos os catálogos e folhetos técnicos Deltrol Controls
-
DSVP40-S
4 Páginas
-
DSVP10
5 Páginas
-
Solenoids
6 Páginas
-
Hose Sets
3 Páginas
-
Relays
6 Páginas
-
MED 20x2_0
3 Páginas
-
DSVP16N
3 Páginas
-
Solenoid Data Sheet Catalog
114 Páginas
-
DSVP12N Dispense Valve
7 Páginas
-
Dispensing Valves Catalogue
4 Páginas
-
MED 24x1.700 Tubular Frame Solenoid
4 Páginas
-
C-6 C-Frame Solenoid
4 Páginas
-
C-7 C-Frame Solenoid
4 Páginas
-
C-8 C-Frame Solenoid
4 Páginas
-
C-15 C-Frame Solenoid
4 Páginas
-
C-9 C-Frame Solenoid
4 Páginas
-
D-11 D-Frame Solenoid
4 Páginas
-
D-17 D-Frame Solenoid
4 Páginas
-
D-22 D-Frame Solenoid
4 Páginas
-
D26-ML Magnetic Latching Solenoid
3 Páginas
-
D-28 D-Frame Solenoid
4 Páginas
-
D-30 D-Frame Solenoid
4 Páginas
-
D30-ML Magnetic Latching Solenoid
3 Páginas
-
D3-HD D-Frame Solenoid
4 Páginas
-
D4-HD D-Frame Solenoid
4 Páginas
-
PS-75 D-Frame Solenoid
4 Páginas
-
D-90 D-Frame Solenoid
4 Páginas
-
D4-ML Magnetic Latching Solenoid
3 Páginas
-
Solenoid Catalogue
6 Páginas
-
Inlet Valve Catalogue
4 Páginas
-
Relay Catalogue
6 Páginas
-
DSVP14N Dispense Valve
5 Páginas
-
DSVP15N Dispense Valve
6 Páginas
-
DSV43N Inlet Valve
3 Páginas
-
MED 12x1.500 Tubular Frame Solenoid
4 Páginas
-
MED 16x1.125 Tubular Frame Solenoid
4 Páginas
-
MED 16x2.000 Tubular Frame Solenoid
4 Páginas
-
MED 19x2.700 Tubular Frame Solenoid
4 Páginas
-
MED 24x2.400 Tubular Frame Solenoid
4 Páginas
-
D-70 D-Frame Solenoid
4 Páginas
-
D-50 D-Frame Solenoid
4 Páginas
-
D-2 D-Frame Solenoid
4 Páginas
-
C-5 C-Frame Solenoid
4 Páginas
-
C-4 C-Frame Solenoid
4 Páginas
-
DSVP42-S Inlet Valve
3 Páginas
-
DSVP40-S Inlet Valve
3 Páginas
-
DSVP40-R Inlet Valve
3 Páginas
-
DSVP10N Dispense Valve
5 Páginas
-
Hose Set Data Sheet
3 Páginas
-
DSVP11N Dispense Valve
7 Páginas
-
Latching Relays 166ML
2 Páginas
-
Power Relays 900 series
2 Páginas
-
Power Relays 177 series
1 Páginas
-
Latching Relays 105ML
2 Páginas
-
Latching Relays 101ML
2 Páginas
-
Power Relays 295 series
2 Páginas
-
Power Relays 375 series
2 Páginas
-
Power Relays 270/275 series
2 Páginas
-
105 SERIES RELAY - GENERAL PURPOSE
2 Páginas
-
260 SERIES RELAY - GENERAL PURPOSE
2 Páginas
-
160 SERIES RELAY - GENERAL PURPOSE
2 Páginas
-
100 SERIES RELAY - GENERAL PURPOSE
2 Páginas