37-365X
1 / 1Páginas

{{requestButtons}}

Excertos do catálogo

37-365X - 1

Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker. Cabinet stand completely encases motor and pulleys to protect from dust and shavings Specially-designed cast-iron fence is extra-long for continued support throughout the cut. Fence is center-mounted and functions as a rear guard on narrow cuts. Modular cutterhead provides a consistently clean cut. Jackscrew arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production downtime. Extra-long infeed table provides a full 76-1/2" of work support Runs on sealed, lubricated-for-life ball bearings Motor: 1 ½ HP, 120/240V (Wired 240V), 60 Hz, 1 Phase TEFC, 3,450 RPM Cut Capacity - Depth: 5/8" Cutterhead Speed: 16,500 CPM5,500 RPM Cutterhead Diameter: 3-3/8" Table Length of Front Table (Infeed): 42" Table Width: NA Fence Size: 5"x35" Fence Positive Stops: In and Out 90°, 45° Length: 76.5" Height: 32" Cut Capacity - Width: 8" Rabbeting Capacity: 5/8" Number of Knives: 3 Table Length: 76-1/2" Table Length of Rear Table (Outfeed): 32" Table Height: 32" Fence Tilt: In and Out 45° Dust Port Diameter: 4" Width: 26" Weight: 394 lbs

Abrir o catálogo na página 1

Todos os catálogos e folhetos técnicos Delta Power Equipment Corp

  1. SA350K

    1 Páginas

  2. 31-260X

    1 Páginas

  3. 22-590

    1 Páginas

  4. 46-460

    1 Páginas

  5. 50-761

    1 Páginas

  6. 50-760

    1 Páginas

  7. 32-325

    1 Páginas

  8. 18-900L

    1 Páginas

  9. RS830

    1 Páginas