Catálogos >
Curtis Instruments >
Motor Speed Controllers 1204/1204S/1205

Motor Speed Controllers 1204/1204S/1205
1 / 2Páginas

Excertos do catálogo

Motor Speed Controllers 1204/1204S/1205 - 1

High frequency switching and ultra low voltage drops provide very high efficiency and silent operation. Costs, heatsinking requirements and motor and battery losses are reduced. Low end torque, range and battery life are increased. Օ Environmental protection provided by a rugged anodized aluminum extrusion housing. Simple mounting and wiring with push-on type connectors for control signals. Plated solid copper busses used for all power connections. Thermal protection and compensation circuit provides constant current limit over operating range and under temperature and over temperature cutback. No sudden loss of power under any thermal conditions. Օ No adjustments are required. Simple installation ՗ Uses a two wire throttle potentiometer. Potentiometer fault protection circuitry disables controller if throttle wires become open. Օ High pedal disable prevents controller operation if key is turned on while throttle is applied. > Plug braking diode internal to controller. Curtis PMC Models 1204/1204S/1205 are power MOSFET electronic motor speed controllers designed to provide smooth, silent, efficient and cost effective speed, torque and braking control. > Օ Frequency of Operation: 15 kHz Standby Current: less than 20 mA Օ Standard Throttle Input: 0-5k ohms 10% (others available) > Curtis PMC MOSFET motor speed controllers are ideal for a variety of electric vehicle applications, including industrial trucks, personnel carriers, material handling vehicles and golf cars, etc. ѕ Weight: 1204/1204S: 1.8 kg (4 lbs); 1205: 2.7 kg (6 lbs) Full Power Operating Temperature Range: -25հC to 75C (controller temperature) >

Abrir o catálogo na página 1