Catálogos >
Cubic Sensor and Instrument Co.,Ltd >
Infrared Carbon Dioxide Gas Transmitter CRH Series

Infrared Carbon Dioxide Gas Transmitter CRH Series
1 / 7Páginas

Excertos do catálogo

Infrared Carbon Dioxide Gas Transmitter CRH Series - 1

INFRARED FIXED CARBON DIOXIDE (CO2) GAS TRANSMITTER Wuhan Cubic Optoelectronics Co., Ltd Add:Fenghuang No.3 Road, Fenghuang Industrial Park,Eastlake Hi-tech Development Zone, Wuhan 430205, China Tel: 86-27-81628831 Fax: 86-27-87405251 www.GasSensor.com.cn

Abrir o catálogo na página 1

Infrared Carbon Dioxide Gas Transmitter CRH Series - 2

cuwg oproajtCTHOfMCs co-^m ■ Infrared fixed CO2 transmitter is a perfect integration of world-leading NDIR technology and premium components. widely used in petroleum, chemical, metallurgy . ■ It support wide voltage output, infrared remote control, RS485, 4 ~ 20MA and 2 level alarm output, LED display and so on.

Abrir o catálogo na página 2

Infrared Carbon Dioxide Gas Transmitter CRH Series - 3

Proprietary infrared gas analysis technology, with high accuracy, high resolution, long life and easy maintenance; ■ High and low alarm settings, two levels of audio and light alarms; ■ Automatic zero calibration with air; ■ Diffusion-type sampling methods; ■ Real-time Digital displaying gas concentration with LED; ■ Audible alarm device to prevent accidents and ensure the safety of life; ■ Metal case for industrial online monitor

Abrir o catálogo na página 3

Infrared Carbon Dioxide Gas Transmitter CRH Series - 4

wUhMi CU.3IC G^TOtLtCTWOiviCS CO-^m Specifications

Abrir o catálogo na página 4

Infrared Carbon Dioxide Gas Transmitter CRH Series - 5

WUhMiM CU*tC ti*-TG*±JfcCT*OmC:i CO^m Fixed CO2 gas transmitter is an ideal instrument with alarm function to monitor the concentration of CO2, such as chemical industry, mine, fermentation areas in wineries, metallurgy, dairying, workshop, storage as well as the leakage of CO2.

Abrir o catálogo na página 5

Infrared Carbon Dioxide Gas Transmitter CRH Series - 6

WUHAM Cu«*c OfTO^CTKONiCS CO^LTD. ■Transmitter mounting height is decided by the measured gas weight ratio. If the measured gas is less than air, the transmitter is usually installed in the up place, 30cm from the ceiling; if the ceiling is high (higher than 5 meters), the proper installation height should be considered by the gas leakage speed; ■Transmitter installation place is determined by gas leakage source and working structure. 1) Firstly to check the area of working place and possible leakage points to determine required quantity of gas detector. In general, the detection probe...

Abrir o catálogo na página 6