Catálogos >
Condor Pressure Control GmbH >
Pressure switch MDR 11

Pressure switch MDR 11
1 / 3Páginas

Excertos do catálogo

■ single phase ■ switching capacity 4.0 kW / 4 HP ■ Max. cut-out pressure 6 bar / 87 psi ■ incl. cable glands PG13.5 Z/ZK ■ 2-pole (N.C.) ■ steel flange ■ Acc. to EN 60947 ■ uL / CsA-approval optional ■ differential adjustment ■ Flange = steel (U = with screw connection) Diaphragm media resistance MDR 11 A detailed overview of diaphragm media resistance for all pressure switches can be found on page 22. Please read the information carefully.

Abrir o catálogo na página 1

High performance Pressure switches Dimensions / Circuit Diagrams MDR 11 Pressure switch MDR 11 Accessories MDR 11 Order reference Unloader valves with quick-connect 6 mm for plastic unloader valves 90° unloader valve with quick-connect for 1/4“ plastic tubes, quick-connect can be rotated 360° Delayed unloader valves with quick-connect 6 mm for plastic unloader valves Cable glands Grommets With strain relief With strain relief and cable support *only for pneumatic tubes with outside tolerances according to e. g. Festo PAN 6x1mm Unloader valves / Delayed unloader valves

Abrir o catálogo na página 2

Pressure switch MDR 11 Dimensions, Accessories MDR 11 Explanation Devices with differential pressure adjustment An intersecting point is determined in the diagram by selecting a pair of cut-in and cut-out pressure values. If this point lies within thebshaded area, this pair of values can be set on the pressure switch. If this point lies outside the shaded area, these values cannot be set. Example: MDR 1/11 with differential pressure adjustment With a preselected cut-in pressure of 4 bar, the cut-out pressure can be determined and set between 5.4 and 8 bar using the differential pressure...

Abrir o catálogo na página 3

Pressure switch MDR 11 1 / 3Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Condor Pressure Control GmbH

Pressure switch MDR 11
1 / 3Páginas