Catálogos >
Conair >
MDCW Carousel Plus Dryer

MDCW Carousel Plus Dryer
1 / 115Páginas

Excertos do catálogo

www.conairgroup.com USER GUIDE UGD033-0311 MDCW Carousel Plus Dryer MDCW Models 15, 25, 50, 75, and 100 with DC-1 Controls Corporate Office: 724.584.5500 l Instant Access 24/7 (Parts and Service): 800.458.1960 l Parts and Service: 814.437.6861

Abrir o catálogo na página 1

Please record your equipment's model and serial number(s) and the date you received it in the spaces provided. It's a good idea to record the model and serial number(s) of your equipment and the date you received it in the User Guide. Our service department uses this information, along with the manual number, to provide help for the specific equipment you installed. Please keep this User Guide and all manuals, engineering prints and parts lists together for documentation of your equipment. Date: Manual Number: UGD033-0311_ Serial Number(s): Model Number(s): * Display Firmware Version:...

Abrir o catálogo na página 2

Purpose of the User Guide This User Guide describes the Conair MDCW Carousel Plus sries dryers and explains step-by-step how to install, operate, maintain, and repair this equipment. Before installing this product, please take a few moments to read the User Guide and review the diagrams and safety information in the instruction packet. You also should review manuals covering associated equipment in your system. This review won't take long, and it could save you valuable installation and operating time later. How the Guide is Organized Symbols have been used to help organize the User Guide...

Abrir o catálogo na página 8

Your Responsibility as a User You must be familiar with all safety procdures concerning installation, opra驭tion and maintenance of this equipment. Responsible safety procedures include: Thorough review of this User Guide, paying particular attention to hazard warnings, appendices and related diagrams. Օ Thorough review of the equipment itself, with careful attention to voltage sources, intended use and warning labels. Thorough review of instruction manuals for associated equipment. Օ Step-by-step adherence to instructions outlined in this User Guide. 1-3

Abrir o catálogo na página 9

ATTENTION: Read this so no one gets hurt We design equipment with the user's safety in mind. You can avoid the potential hazards identified on this machine by following the procedures outlined below and elsewhere in the User Guide. /\ WARNING: Improper installation, opration, or servicing may result in equipment damage or personal injury. This equipment should be installed, adjusted, and serviced by qualified technical personnel who are familiar with the construction, operation, and potential hazards of this type of machine. All wiring, disconnects, and fuses should be installed by...

Abrir o catálogo na página 10

ATTENTION: Read this so no one gets hurt We design equipment with the user's safety in mind. You can avoid the potential hazards identified on this machine by following the procedures outlined below and elsewhere in the User Guide. ITION: Hot Surfaces. Always protect yourself from hot surfaces inside the dryer and hopper. Also exercise caution around exterior surfaces that may become hot during use. These include the hopper door frame, the exterior of an uninsulated hopper, the return air hose and the dryer's process filter housing and moisture exhaust outlet. WARNING: Do not place arosol,...

Abrir o catálogo na página 11

How to Use the Lockout Device A CAUTION:Before performing maintenance or repairs on this product, you should disconnect and lockout electrical power sources to prevent injury from unexpected energization or start-up. A lockable device has been provided to isolate this product from potentially hazardous electricity. Lockout is the preferred method of isolating machines or equipment from energy sources. Your Conair product is equipped with the lockout device pictured below. To use the lockout device: 1 Stop or turn off the equipment. 2 Isolate the equipment from the electric power. Turn the...

Abrir o catálogo na página 12

What is the MDCW Carousel Plus Dryer? The MDCW Carousel Plus Dryer is a self-contained, mobile unit designed to dry plastic resin and convey it with dehumidified air directly to a processing machine. This mobile unit contains: A mobile dehumidifying dryer Օ Drying hopper with a material distribution box Conveying blower and filter* Օ Direct feed machine loader with a demand sensor* Quick disconnect conveying hoses *not on non-conveying models The dryer produces hot, low dewpoint air that removes moisture from hygroscopic plastics. When the conveying function is turned on, the conveying...

Abrir o catálogo na página 14

Typical Applications The MDCW Carousel Plus Dryer was designed for drying and conveying beside the press. But it can also be used to pre-dry material in one location, and then transport the dried material to another location for conveying into the processing machine. The MDCW can be used successfully in applications that require: A contamination-free drying environment. ^ ..Մ.,.. T, 3 ^ NOTE: Throughput rates will vary Drying temperatures of 100° to 375°F {66° to 191°C}. u..ՙ., ,,, 3 by MDCW model and type of Throughput rates of 15 to 100 lbs {6.8 to 45.4 kg} per hour (some materials can ,...

Abrir o catálogo na página 15

Typical Applications (continued) The MDCW Carousel Plus Dryer can be used successfully in applications that require: A contamination-free drying environment Օ Drying temperatures within the ranges shown in the following table: Model Drying Temprature Range Low temprature (with precooler)* 100° - 150°F {38° - 66°C} Standard 150° - 240°F {66° - 116°C} High heat (with aftercooler)* 150° - 375°F {66° - 191°C} Low-high (with aftercooler & precooler)* 100° - 375°F {38° - 191°C} *See page 3-11, Appendix B 驕 Throughput rates of 15 to 100 lbs {6.8 to 37.3} per hour (some materials can be ran at a...

Abrir o catálogo na página 16

How It Works □ The Process (Drying) Cycle The process blower pulls moist air from the top of the drying hopper. The air passes through the process filter and aftercooler, then into the desiccant wheel, where moisture is removed. The now dry air moves through the optional precooler (if installed) and process heater, where it is heated to the drying temperature selected by the operator. The hot, dry air is delivered to the hopper where a spreader cone evenly distributes the air through the material. ■ The Regeneration Cycle The regeneration blower pulls air through the regeneration filter...

Abrir o catálogo na página 17

MDCW Carousel Plus Dryer 1 / 115Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Conair

MDCW Carousel Plus Dryer
1 / 115Páginas