Catálogos >
Conair >
32-SERIES AND 35-SERIES MODELS 3241, 3262, 3560 AND 3580

32-SERIES AND 35-SERIES MODELS 3241, 3262, 3560 AND 3580
1 / 4Páginas

Excertos do catálogo

32-SERIES AND 35-SERIES MODELS 3241, 3262, 3560 AND 3580 - 1

4 Direct, safe and easy access to machine core Conair's innovative 32- and 35-Series tilt-back hopper and cutting chamber features a manual assist screen cradle opener and removable discharge bin. Complete rotor access simplifies clean out and blade maintenance saving you time and money. Integral safety interlocks prevent accidental operation during service or clean out. ' High-quality regrind The scissor-cutting configuration, larger screen area, and pre-adjustable rotating and fixed knives provide consistent knife gaps to produce high quality regrind. ' Greater screen area equals higher throughput with fewer fines Rotor knives adjust outward to the stationary bed knives to maintain an unchanging gap between the knives and screen, eliminating screen clogging, minimizing heat buildup and reducing fines for best-in-class throughput of higher quality regrind. ' Automatic rotor safety lock The 32- and 35-Series rotor automatically locks in place when the hopper is raised. This safety feature, which also has a manual release, protects the operator during blade maintenance by holding the rotor firmly in place. ' Pre-Adjustable knives Provides the ultimate in blade changes. Knives are pre-set in the included knife setting fixture decreasing the time it takes to replace knives while improving safety. ' Water-cooled cutting chamber Keeping the cutting chamber cool when handling heat sensitive or hot material increases granulate quality while decreasing the risk of downtime associated with screen clogging. Powerful, High-Capacity Granulators For Multiple Applications Conair's Viper Granulator, heavy-duty 32- and 35-Series granulators are designed for high throughput applications to provide exceptional and dedicated size reduction suitable for large volume post industrial and post consumer recylcing as well as thermoforming with the optional feed roll devices. These industrial-strength granulators feature heavy duty rotors and cutting chambers allowing you to process virtually any kind of scrap. It is also offered in a wet-grinding configuration for PET and HDPE bottle recycling. Easy pre-adjustment of the gap between rotor and fixed bed knives results in increased throughputs and high-quality, uniform regrind. Conair's 32- and 35-Series are robust, heavy-duty central granulators for reclaim of all types of plastic materials and applications. In addition to the robust design of the cutting chamber and rotor, the 32- and 35-Series offer a drop-down screen cradle powered by a manual jack for the industry's fastest and safest chamber access. A five-blade slant-knife open rotor provides scissor-cutting action for fast, efficient processing. An optional seven-blade open rotor is available for more demanding applications. 32- and 35-Series also offer custom hoppers for front, side, rear and roll feed to accommodate most every type of feed system. Hoppers are easily opened/closed with a powered linear actuator. 32- and 35-Series options include: high-wear screen and knives, blower evacuation systems, fines removal systems, feed rolls, high-level/ high-amp alarms, larger horsepower motors, and incline conveyors with and without a metal detector. www.conairgroup.com | info@conairgroup.com | 724 584 5500

Abrir o catálogo na página 1

32-SERIES AND 35-SERIES MODELS 3241, 3262, 3560 AND 3580 - 2

Rotor equipped with rotating end disks Roller bearings mount integral with cutting chamber Double flywheel-type rotor pulley mounted with taper-lock bushing Rotor "zero speed" sensor Stationary rotor lock for safe cutting chamber maintenance Easy tool-free access for quick and simple cleaning and maintenance Manual assisted drop-down screen Powered hopper opening and closing 5- or 7-knife rotor with steep angle cutting configuration Scissor-cutting configuration Pre-adjustable knives Open area screen equal to approximately 50% of the rotor diameter Water-cooled cutting chamber Floor-mount...

Abrir o catálogo na página 2

32-SERIES AND 35-SERIES MODELS 3241, 3262, 3560 AND 3580 - 3

Specifications Granulator with standard hand feed hopper 32-Series Side view Specification Notes Application Note Allow appropriate clearance above machine for hopper tilting during maintenance. * Throughputs are provided as a capacity guideline only. Throughput will be greater or lesser than the values shown according to the selected screen size and the shape, size, thickness and properties of the material to be cut. Consult Conair for a material test to help in determining the correct granulator model for your application. f FLA data for reference purposes only. Does not include any...

Abrir o catálogo na página 3