Grooving
1 / 6Páginas

Excertos do catálogo

maximum depth to first groove 9.923.501.700.751.25 Note: Pilots made to fit TEMA standard tube sheet hole diameters. (See under Ordering, Pilot Only,Ӕ back page.) Overtravel and morse taper shanks are available (see ordering information on back panel). Interchangeable pilots allow easy diameterchanges. Pilots are specifically designed to maximize coolant flow for enhanced tool life.High-speed steel cutters are TiN-coatedfor long life. >

Abrir o catálogo na página 3

CMYK ■ Refer to details drawing on reverse side. ■ MAKE SURE ■ The cutter ( Detail #8 ) is mounted in the arm ( D #2 or #3 ) with two ( 2 ) #4-40 x 0.25 Torxscrews ( D #9 ). Ԣ֠ The pilot ( D #4, #5, #6, or #7 ) and arm are installed at the same time. ■ The pull yoke end of the arm ( opposite the cutter end of the arm ) is installed on thedowel (pull) pin ( D #34 ) in the recessing head. The arm should be installed with theelevated platform contacting the leaf springs ( D #24 ) in the head. ■ Insert the pilot into the head, making sure the arm is mounted in the slot in the pilot. Thepilot...

Abrir o catálogo na página 4

■ COMPLETE TOOL ASSEMBLY ■ Par t number Description ■ TSP-00625 5/8 in. complete tool with 3/4 in. SS ■ TSP-00750 3/4 in. complete tool with 3/4 in. SS ■ TSP-00875 7/8 in. complete tool with 3/4 in. SS ■ TSP-01000 1 in. complete tool with 3/4 in. SS ■ TSP-00625-3MT 5/8 in. complete tool with #3MT ■ TSP- 00750-3MT 3/4 in. complete tool with #3MT ■ TSP-00875-3MT 7/8 in. complete tool with #3MT ■ TSP-01000-3MT 1 in. complete tool with #3MT ■ TSP-00625-1OT 5/8 in. complete tool with 1 in. SS with OT* ■ TSP-00750-1OT 3/4 in. complete tool with 1 in. SS with OT* ■ TSP-00875-1OT 7/8 in. complete...

Abrir o catálogo na página 6

Grooving 1 / 6Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Cogsdill - Nuneaton

Grooving
1 / 6Páginas