Catálogos >
CKD >
KBZ series

KBZ series
1 / 64Páginas

Excertos do catálogo

Miniaturization allows BBS series to expand its potential. Electric actuator KBZ series KBZ SERIES Performs high-precision locating and allows combination with KBB series!

Abrir o catálogo na página 1

Performs high-precision locating Electric actuator Short cycle time Operates at the maximum of 1000 mm/s. (For limited stroke and load capacity. Contact our sales representative for details.) Servo motor A servo motor for a compact axis to allow high-speed operation, quick acceleration and deceleration, and high load capacity. Absolute position system No need for return-to-home routines. Compact controller Uncompromised downsizing and cost reduction.

Abrir o catálogo na página 2

Axis features Resolver as a motor sensor A brushless resolver serves as a motor sensor. It has excellent environmental durability (against high and low temperatures, vibrations, and physical shocks). Compact and high power servo motor A compact servo motor allows high-speed operation, quick acceleration and deceleration, and high load capacity. Absolute position system No need for time-consuming return-to-home routines; equipment start-up time can be shortened. 3 model types Slider, table, and rod type axes are available. Controller features Compact It is as compact as 31 (W) x 146 (H) x 89...

Abrir o catálogo na página 3

Performance Easier to use with new functions! Suitable for operations requiring high-precision positioning. Realizes improvement in machining quality. Its high positioning accuracy allows to position an insert point more accurately (thereby resulting in stable products). Introducing the new controller KCA-01 with brand-new features Torque control function, area entry signal output, individual acceleration and deceleration settings Pushing of a workpiece (torque control function) Pushing force can be easily adjusted to prevent workpiece damage. * The master controller offers this function....

Abrir o catálogo na página 4

Product lineup [Single axis] Ball screw drive KBB-10 Stroke: 100 to 1050 mm Max. load capacity: 15 to 50 kg (horizontal) Motor: 100 W Ball screw drive KBB-30 Stroke: 100 to 1050 mm Max. load capacity: 20 to 80 kg (horizontal) Motor: 100 W 200 W Ball screw drive KBB-50 Stroke: 200 to 1500 mm Max. load capacity: 60 to 150 kg (horizontal) Motor: 200 W 400 W Timing belt drive Stroke: 100 to 2500 mm Max. load capacity: 10 to 40 kg (horizontal) Motor: 100 W 200 W 400 W Rotation range: 360 degrees Max. load capacity: 5 kg Motor: 50 W Harmonic drive Rotation range: 360 degrees Max. load capacity:...

Abrir o catálogo na página 5

Specifications Selection guide Slider Type Table Type

Abrir o catálogo na página 6

Horizontal operation *1: Stroke is 50 mm or less *2: Stroke range is between 51 mm and 100 mm *3: Stroke range is between 101 mm and 150 mm *1: Stroke is 50 mm or less *2: Stroke range is between 51 mm and 100 mm Maximum load capacity (kg) Vertical operation

Abrir o catálogo na página 7

Safety precautions Always read this section before starting use. When designing and manufacturing devices using electric actuator, the manufacturer has an obligation to manufacture a safe device, and to check that the safety of the device's mechanical mechanism and the system operated by the electrical control that controls the device is secured. It is important to select, use, handle, and maintain the product appropriately to ensure that the CKD product is used safely. Observe warnings and precautions to ensure device safety. Check that device safety is ensured, and manufacture a safe...

Abrir o catálogo na página 8

Set up the overcurrent protection device. In carrying out wiring to the controller, install over-current protective devices (such as wiring breaker and circuit protector) to the primary power supply for power (terminal block number L1, L2 and L3) and control (connector number CN324VDC) in accordance with "JIS B 9960-1:2008 Safety of machinery - Electrical equipment of machines - Part 1: General requirements". (Excerpt from JIS B9960-1 7.2.1 General Requirements) Overcurrent protection shall be provided where the current in a machine circuit can exceed either the rating of any component or...

Abrir o catálogo na página 9

Safety precautions Electric actuator: Warnings, Cautions Always read this section before starting use. For series-specific precautions and warnings, refer to sections of each series. Design & Selection D o not operate the product in flammable or explosive atmospheres. Design & Selection U se the product within the product-specific specification scope. I nstall a protection cover in case of possible danger to the operator. C onsider the operation status if the machine is reactivated after emergency stop or abnormal stop. the electric actuator's movable portions may pose danger If to the...

Abrir o catálogo na página 10

Slider type [How to order] Master controller Stroke Brake Refer to "Indication 0: no controller N: no brake in model no." in 1: KCA-01-M05 B: brake installed specifications Axis options Blank: no option M: motor cover [Specifications] Motor output Drive system Stroke (mm) in 50 mm increments Max. speed (mm/s) Max. load capacity (kg) Acceleration/deceleration time (sec) Positioning repeatability (mm) Resolution (mm) Allowable static moment (N•m) Brake Master controller 50W, AC servo motor (resolver) Rolled ball screw (class 7 equivalent); outside diameter: 8mm Internal slider 50 to 450 500...

Abrir o catálogo na página 12

Slider type [How to order] Brake Stroke Refer to "Indication N: no brake B: brake installed in model no." in specifications Master controller 0: no controller 1: KCA-01-M05 Axis options Blank: no option M: motor cover [Specifications] Motor output Drive system 50W, AC servo motor (resolver) Rolled ball screw (class 7 equivalent); outside diameter: 12 mm Internal slider 50 to 550 600 700 Indication in model no. 05 to 55 60 70 6 mm lead 400 340 250 12 mm lead 800 680 500 6 mm lead When used horizontally: 12.0, when used vertically: (4.0), acceleration / deceleration time: 0.1 s or more 12 mm...

Abrir o catálogo na página 13

Table type [How to order] Brake Stroke Master controller Refer to "Indication 0: no controller N: no brake B: brake installed in model no." in 1: KCA−01−M05 specifications Axis options Blank: no option M: motor cover [Specifications] Motor output Drive system 50W, AC servo motor (resolver) Rolled ball screw (class 7 equivalent); outside diameter: 8mm Table 50 100 Stroke (mm) in 50 mm increments Indication in model no. 05 10 6 mm lead 400 Max. speed (mm/s) 12 mm lead 800 Lead: 6 mm When used horizontally: 4.5 When used horizontally: 3.0 Max. load capacity (kg) When used vertically: (2.5)...

Abrir o catálogo na página 14