Catálogos >
C.A.Technologies >
Panther 100G

Panther 100G
1 / 4Páginas

Excertos do catálogo

Panther 100G TEFLON COATED SPRAY GUN PRODUCT INFORMATION Recommend Air Caps for Adhesives: 21-2263 (1.3 - 1.8 setup) 21-2266-3T (1.3 - 1.8 setup) 21-2167 (2.2 setup) 21-2168 (2.8 setup) CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART FLUID TIP RANGE FAN CONTROL AVAILABLE FLUID NOZZLES NEEDLES/ marking on needle Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) Gun inlet pressures may vary as required by application 200 Air cap requires P/N 21-1583 base & 21-1584 ring Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 _www.spraycat.com_

Abrir o catálogo na página 1

Operation and Maintenance Instructions for Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply or paint siphon cup to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning and maintenance is...

Abrir o catálogo na página 2

Fluid Nozzle Body Nozzle Body Carrier Allen Plug Rear Bushing Fluid Needle* Needle Return Spring (HD)* Panther Gun Body Conventional *See air cap selection chart on page 1 Indicates part included in repair kit # 10-110

Abrir o catálogo na página 3