Solenoid valves 6240
1 / 9Páginas

{{requestButtons}}

Excertos do catálogo

Solenoid valves 6240 - 2

Solenoid valve valve 6240 The compact power Gases, drinking water, hot liquids and steam are the application focuses of the type 6240 piston valve. The body, seals and design were selected in accordance with the required certificates and general requirements. The piston solenoid valve 6240 combines the advantages of a servo-controlled and a direct-acting valve. It is suitable for both high pressures and large diameters. The fixed coupling between the pilot valve and piston of the main seat ensures complete opening even without differential pressure. The advanced piston design and optimal...

Abrir o catálogo na página 2
Solenoid valves 6240 - 3

The material and construction form the basis for a valve’s reliability and safe operation. Especially fuel gases and steam place high requirements on the materials used. The 2/2-way piston valve type 6240 features a large selection of tested materials. This makes it possible to adapt the valve to specific applications. The following versions are available: Versions optimized for applications are also available, in addition to certifications, facilitating the choice of the right valve. The following table provides an overview. Pressure range: 0 to 25 bar for liquids (up to 40 bar for gaseous...

Abrir o catálogo na página 3
Solenoid valves 6240 - 4

Functioning principle Sample applications Spring-coupled piston valve Steam applications The anchor of the pilot valve is firmly connected by a spring to the piston of the main valve. The springcoupling ensures that a force is exerted directly on the piston when the valve is switched on, causing the main valve to open. Even without differential pressure this force is sufficient to open the valve completely . At a high differential pressure the switching of the valve is determined essentially by the characteristics of the servo valve. In this case the differential pressure supports the...

Abrir o catálogo na página 4
Solenoid valves 6240 - 5

Fluidic design and robust construction Highly durable and resistant Effective explosion protection Compact and highly efficient Body variants and pressure ranges Explosion protection Compact power bundle The brass version of the valve is suitable for controlling liquids and gases. The special fluidic form (ramp design) of the valve body enables maximum flow rates. The stainless steel version allows use in slightly acidic and alkaline solutions. For applications in gases the device is available with PTFE sliding rings, which ensure low-wear operation and long maintenance intervals even when...

Abrir o catálogo na página 5
Solenoid valves 6240 - 6

x = available in standard version A = available on request Solenoid valves 6240 Solenoid valves 6240 1 1

Abrir o catálogo na página 6
Solenoid valves 6240 - 7

Accessories: Connectors The connectors 2508 and 2509 are available as accessories supplement and expand the application spectrum of the solenoid valve. Besides visualization of the switching state and various standard functions, an energy-saving reduced power version (2508 LR) is available for extended duty cycles. With polarity protection, recovery diode and LED Without circuitry, 2-pin + protective conductor With rectifier and varistor With power reduction type 2508 LR Technical data See also data sheet for type 2508 Solenoid valves 6240 Solenoid valves 6240 1 3

Abrir o catálogo na página 7
Solenoid valves 6240 - 8

For up-to-date addresses please visit us at www.burkert.com. Norway Poland Austria Czech Republic United Kingdom Germany Italy China Hong Kong India Canada Korea Malaysia Philippines Singapore United Arab Emirates Brazil South Africa Credits: © and concept: Christian Bürkert GmbH & Co. KG | Realization: WOLF, Berlin | Photography: Münch Lichtbildnerei, Stuttgart; Studio Flamisch, Düsseldorf | 3D-Drawings: 3D Sales Technologies GmbH. All people shown are employees at Bürkert. Thank you for your support (and spirit). Solenoid valves

Abrir o catálogo na página 8
Solenoid valves 6240 - 9

894346 | Version PDF 01/2019 | Burkert Corporate Communications ■ Burkert Fluid Control Systems Christian-Burkert-StraBe 13-17 74653 Ingelfingen Germany Tel.: +49 (0) 7940/10-0 Fax: +49 (0) 7940/10-91 204 info@burkert.com www.burkert.com

Abrir o catálogo na página 9

Todos os catálogos e folhetos técnicos BÜRKERT FLUID CONTROL SYSTEMS

  1. Type 0121

    16 Páginas

  2. Type 6240

    26 Páginas

  3. Type 8020

    10 Páginas

  4. Type 8026

    12 Páginas

  5. Type 8605

    13 Páginas

  6. Type 8692

    18 Páginas

  7. Type 5470

    15 Páginas

  8. 8041

    10 Páginas

  9. Type 0498

    6 Páginas

  10. Type 8081

    9 Páginas

  11. Type 2300

    32 Páginas

  12. Type 8012

    21 Páginas

  13. Type 8110

    11 Páginas

  14. Type 8010

    14 Páginas

  15. 8222

    8 Páginas

  16. Type 8137

    12 Páginas

  17. Typ 8804

    12 Páginas

  18. Solenoid Valves

    31 Páginas

  19. 6240

    11 Páginas

  20. Type 0301

    4 Páginas

  21. Type 0201

    4 Páginas

  22. Type 0300

    6 Páginas

  23. Type 0200

    6 Páginas

  24. Type 0131

    4 Páginas

  25. Type 0142

    4 Páginas

  26. Type 0117

    3 Páginas

  27. Type 0293

    3 Páginas

  28. AirLINE SP

    2 Páginas

  29. Dosing Systems

    4 Páginas

  30. CUT Product Line

    9 Páginas

  31. Cooling Towers

    2 Páginas

  32. MicroFluidics

    2 Páginas

  33. Fuel Cell Tech

    2 Páginas

  34. Robot Welding

    2 Páginas

  35. Plastic Extruding

    2 Páginas

  36. Flyer Cooking

    2 Páginas

  37. Injection Molding

    2 Páginas

  38. Heat Exchanger

    2 Páginas

  39. Clean Steam

    2 Páginas

  40. Food and Beverage

    32 Páginas

  41. Company profile

    15 Páginas

  42. steam products

    16 Páginas

Catálogos arquivados

  1. Type 6281

    21 Páginas

  2. 6281

    13 Páginas