Catálogos >
BÜRKERT FLUID CONTROL SYSTEMS >
Flowmeter Type 8045

Flowmeter Type 8045
1 / 4Páginas

Excertos do catálogo

894273 / Version 10/12 Print 10/12 www.wolf-corporate.de EMF, Type 8045 Electromagnetic Flowmeter Insertion Model Bürkert Fluid Control Systems Christian-Bürkert-Straße 13 -17 74653 Ingelfingen Germany Tel.: +49 (0) 7940/10 - 0 Fax: +49 (0) 7940/10 - 91 204 info@buerkert.com www.bu

Abrir o catálogo na página 1

EMFApplications 8045 Type Diversity in The electromagnetic flowmeter 8045 was developed by Bürkert in order to provide a single device for a very broad range of applications with diverse requirements. Type 8045 is ideal for flow regulation of dirty or clean conductive liquids. The liquid and process properties of the actual application can be taken into account. The 8045 can also be used in CIP processes and is optionally available with FDA- or KTW-approved materials. Typical applications include: • Waste water treatment • Flow regulation of drinking water • Drinking water supply in...

Abrir o catálogo na página 2

Product Design and Features Technology and Functions for the Greatest Customer Benefit Flexibility through variety of signals Type 8045 uses the proven magnetic inductive measuring principle for measuring flow The basic version features both an mA output and a digital output. Depending on the rates. The electrodes are not in the measuring tube, but rather at the end of a “finger”, which functions required the 8045 can be equipped with an additional digital output as well as a is permanently connected to the electronic circuitry. This unit comprising the electronics and digital input. Up to...

Abrir o catálogo na página 3

Intelligent Functions for Optimal Process Control Precision – a matter of adjustment Standard EMF are calibrated by the manufacturer under normal conditions. If the fluid Fitting and fluidic connection variants properties vary significantly from those conditions, however, it often makes sense to calibrate a flow meter to the respective fluid properties, process conditions and sensor position and flow rate range. For these conditions the 8045 features an integrated Teach-In function. In addition to an on-site manual K-factor input this function allows to adapt the K-factor to the respective...

Abrir o catálogo na página 4