Catálogos >
BÜRKERT FLUID CONTROL SYSTEMS >
Application-Folder Druckguss_en

Application-Folder Druckguss_en
1 / 2Páginas

Excertos do catálogo

More Than the Sum of its Parts: Individual System Solutions by Bürkert. Especially for die casting lines the cooling influences the part quality very much. In dependance of the number of the cooling lines and the coolant itself (water or water/air mixture) the Buerkert engineers configure the most effective solution. Specially designed for such applications Buerkert developed modular valve bodies with orifice size DN10, DN20 and DN25 which can be adapted to the customers application perfectly. Depending on the number of cooling circuits, the available space and the water quality the best solution based on a broad range of Bürkert valves can be configured. In additon it is possible to integrate sensors for Water- or air flow, temperature or pressure and have it automatically controlled by the unique controller Type 8611. Control systems for Gas Bürkert offers Mass Flow Controller (MFC) and Mass Flow Meter (MFM) with three different sensor designs based on the thermal measurement principle. This allows to cover an expanded flow range for the different kind of gases. MFCs work perfectly. They can be used also in rough environment. Type 8400 RTD sensor In-flow, compact temperature sensor with or without display and remote alarm contacts. Exceptionally easy to use and boasting a large display, temperature indication, transmission and external set point changes at your finger tips. Modular system 2000INOX Bürkert’s new compact class is definitely generous with its charms – but a miser with its space requirements. The modular block system is based around the Type 2000 INOX valve. These features make it perfectly suited for all kinds of fluidic solutions – for example distributing, diverting or mixing. Additionally the integration of filters, sensors or check valves is easy possible. Solenoid On/Off valves for clean fluids Direct acting or servoassisted 2/2 or 3/2-way solenoid valves - Allows partial opening of the diaphragm with 0 psi differential pressure. Perfect for standard potable water applications and is available with Brass or SS Body with sizes ranging to DN40 and 0 - 230 psi (0-16bar). Flow Controller air-/water control cabinet oven control Flow Control of coolant water or air or both. With the PI-Controller 8611 it is possible to set the exact coolant flow in combinatin with all Buerkert valves or sensors. The controller is available in assembly versions like Panel mount(1/16 DIN cut-out), Fitting mount (direct mounting on flow meter), valve mount (direct mounting on proportional valve, wall mount or DIN-rail mount. Flow meter technology for water or air Depending on the required accuracy and the water/air quality, Bürkert offers the right solution. Depending on the required accuracy and the water quality the very established paddle wheel flow meter like Type 8011/8012 or the new very innovative ultrasonic flow meter Type 8081 without moving parts are the perfect choice for measuruing the coolant flow and quarantees a perfect mix of water and air for an optimal cooling. Process Control valves Reliable and maintenance-free pneumatically operated angle seat or globe valve. Available within both gunmetal and SS ranging from DN 06 to 65. High flow rates, self adjusting packing and high sealing integrity make them perfect for cooling applications also in polluted cooling fluids. The valve is available for On/Off solutions as well as control valve for precise setting of the coolant flow in combination with control head or positioner. Solenoid control valves Direct-acting or servo-assisted proportional valves can be used as a control valve for process control and is suitable for technical vacuum. Low hysteresis, high repeatability and high sensitivity ensure superior regulation behavior. Solenoid valves for contaminated fluids Direct acting or servoassisted 2/2 or 3/2-way solenoid valves - Long service life is assured with separating diaphragm which isolates solenoid from operating fluid are making this valve perfect for slightly contaminated fluids. Lockable manual override and freely adjustable opening and closing times for accurate adapting to the customer application.

Abrir o catálogo na página 1

Cooling Systems: Smart Products and Systems for Die Casting Bürkert Fluid Control Systems Christian-Bürkert-Straße 13-17 74653 Ingelfingen Germany Tel. +49 (0) 7940/10-0 Fax +49 (0) 7940/10-91 204 info@burkert.com www.burkert.com Bürkert provides ground breaking cooling system solutions for your die casting process, helping you to enhance work piece quality, speed up your production lines while still saving precious energy. Modern die casting machines demand high standards regarding setting the air flow, the water flow or the air/water mixture. The number of cooling circuits and the quality...

Abrir o catálogo na página 2