6281
1 / 13Páginas

{{requestButtons}}

Excertos do catálogo

6281 - 1

burkert FLUID CONTROL SYSTEMS Servo-assisted 2/2 way diaphragm valve • Servo-assisted diaphragm with diameter of up to DN50 • Vibration-proof, central screwed coil system • Damped design for quiet closing • Service-friendly manual override • Explosion-proof versions Type 6281 can be combined with... DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded out by a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. The valve can be equipped with manual override for easy maintenance and commissioning. In combination with a plug in accordance with DIN EN 175301 - 803 Form A, the valves satisfy protection class IP65 - in combination with a stainless steel housing NEMA 4X. Standard version Dimensions p. 3 Explosion-proof version Dimensions p. 8 - 9 Compressor relief version Ordering chart & Dimensions p. 11 Technical data 2) Measured at valve outlet at 6 bar and + 20 °C. Opening: pressure build-up 0 to 90 %, Closing: pressure decay 100 to 10 % ii (p) 2/2-way solenoid valve servo-assisted, normally closed 2/2-way solenoid servo assisted, normally open

Abrir o catálogo na página 1
6281 - 2

burkert Power consumption Power consumption Materials DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 O-rings: Armature seal: Spring: O-rings: Diaphragm: Diaphragmholder: Valve body: 1 with NBR, EPDM seal 2) with FKM seal Copper (Cu) Silver (Ag) 1.4113 NBR, FKM, EPDM NBR, FKM, EPDM 1.4310 NBR, FKM, EPDM NBR, FKM, EPDM PPSGF40, DN50: Brass and Stainless steel Brass or Stainless steel 1.4408 (316)

Abrir o catálogo na página 2
6281 - 3

burkert Dimensions [mm] DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 K 12 _J For G-thread dimensions F1 and G 1 applies. For NPT-thread dimensions F2 and G 2 applies. For Rc-thread dimensions F3 and G 3 applies. (2 only brass threaded port version only stainless steel threaded port version Coil size

Abrir o catálogo na página 3
6281 - 4

burkert Ordering chart for valves, (other versions on request)Circuit function A (NC, normally closed), Brass bodyDTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 Circuit function Please note that the cable plug has to be ordered separately, see Ordering chart for accessory and separate datasheet, Type 2508.

Abrir o catálogo na página 4
6281 - 5

burkert DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 Ordering chart for valves, continuedCircuit function A (NC, normally closed), Brass body Circuit function 'Drinking water approved acc. to KTW and W270. Please note that the cable plug has to be ordered separately, see Ordering chart for accessory and separate datasheet, Type 2508.

Abrir o catálogo na página 5
6281 - 6

burkert Ordering chart for valves, continuedCircuit function A (NC, normally closed), Stainless steel bodyDTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 Circuit function

Abrir o catálogo na página 6
6281 - 7

burkert Ordering chart for valves, continuedCircuit function B (NO, normally open), Stainless steel body Circuit function Please note that the cable plug has to be ordered separately, see Ordering chart for accessory and separate datasheet, Type 2508. DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 7/13

Abrir o catálogo na página 7
6281 - 8

Eiirkert Dimensions [mm] - ATEX DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 Coil size F2 and G 2 applies. For Rc-thread dimensions F3 and G 3 applies. (2 only brass threaded port version (3 only stainless steel threaded port version

Abrir o catálogo na página 8
6281 - 9

burkert Dimensions [mm] - ATEX Rotated view of the junction box Coil size

Abrir o catálogo na página 9
6281 - 10

6281 Ordering chart for valves, continued Circuit function A, (NC, normally closed)1) explosion proofed version ATEX and IECEx Electrical connection with 3 m cable The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 °C, 100 °C T5, T6 85 °C), minus 5 K. Circuit function A 2/2 way valve NC Circuit function A, (NC, normally closed)1) explosion proofed version ATEX and IECEx Electrical connection with junction box The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 °C, 100 °C T5, T6 85 °C), minus 5...

Abrir o catálogo na página 10
6281 - 11

burkert Compressor relief valve Circuit function B (NO, normally open), brass body Please note that the cable plug has to be ordered separately, see Ordering chart for accessory and separate datasheet, Type 2508. Note: In deenergized state the valve is open. The medium also flows off via the vent on the coil. DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 For G-thread dimensions F1 and G 1 applies. For NPT-thread dimensions F2 and G 2 applies. For Rc-thread dimensions F3 and G 3 applies. Coil size

Abrir o catálogo na página 11
6281 - 12

burkert Further versions on request Port connection NPT, Rc Temperature EPDM version up to + 100 °C with epoxy coil FKM version up to + 120 °C with epoxy coil Approvals European drinking water approval acc. to KTW W270 (Var. code PF23) VDE sign permission acc. to DIN EN 60730 (Var. code PW01) Cable plug Type 2508 according to DIN EN 175301 - 803 Form ADTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 ft! The delivery of a cable plug includes the flat seal and the fixing screw. For other cable plug versions acc. to DIN EN 175301 - 803 Form A...

Abrir o catálogo na página 12
6281 - 13

burkertEx-Cable glands (polyamide version included in delivery / surcharge applied for brass nickel plated version) DTS 1000152082 EN Version: K Status: RL (released | freigegeben | valide) printed: 10.09.2018 Polyamide, PTB 13 ATEX 1015 X, 7 - 13 mm IECEx PTB 13.0034X Special tool to turn the junction box (not included in delivery) Photo To find your nearest Burkert facility, click on the orange box In case of special application conditions, Subject to alteration. please consult for advice. © Christian Burkert GmbH & Co. KG 1809/13_EU-en_00895124

Abrir o catálogo na página 13

Todos os catálogos e folhetos técnicos BÜRKERT FLUID CONTROL SYSTEMS

  1. Type 0121

    16 Páginas

  2. Type 6240

    26 Páginas

  3. Type 8020

    10 Páginas

  4. Type 8026

    12 Páginas

  5. Type 8605

    13 Páginas

  6. Type 8692

    18 Páginas

  7. Type 5470

    15 Páginas

  8. 8041

    10 Páginas

  9. Type 0498

    6 Páginas

  10. Type 8081

    9 Páginas

  11. Type 2300

    32 Páginas

  12. Type 8012

    21 Páginas

  13. Type 8110

    11 Páginas

  14. Type 8010

    14 Páginas

  15. 8222

    8 Páginas

  16. Type 8137

    12 Páginas

  17. Typ 8804

    12 Páginas

  18. Solenoid Valves

    31 Páginas

  19. 6240

    11 Páginas

  20. Type 0301

    4 Páginas

  21. Type 0201

    4 Páginas

  22. Type 0300

    6 Páginas

  23. Type 0200

    6 Páginas

  24. Type 0131

    4 Páginas

  25. Type 0142

    4 Páginas

  26. Type 0117

    3 Páginas

  27. Type 0293

    3 Páginas

  28. AirLINE SP

    2 Páginas

  29. Dosing Systems

    4 Páginas

  30. CUT Product Line

    9 Páginas

  31. Cooling Towers

    2 Páginas

  32. MicroFluidics

    2 Páginas

  33. Fuel Cell Tech

    2 Páginas

  34. Robot Welding

    2 Páginas

  35. Plastic Extruding

    2 Páginas

  36. Flyer Cooking

    2 Páginas

  37. Injection Molding

    2 Páginas

  38. Heat Exchanger

    2 Páginas

  39. Clean Steam

    2 Páginas

  40. Food and Beverage

    32 Páginas

  41. Company profile

    15 Páginas

  42. steam products

    16 Páginas

Catálogos arquivados

  1. Type 6281

    21 Páginas