Excertos do catálogo

biirkert FLUID CONTROL SYSTEMS Servo-assisted 2/2 way piston valve DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Cable plug Timer control The 6240 valve is a servo-assisted plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The housing design and surface quality enable maximum flow rates. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearings increases the life cycle with dry gases. ,Kick and Drop1 electronics are available for over-excitation (plug 2511) and reduced electrical power consumption in operation. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X. ■ Servo-assisted and compact piston valve with diameter of up to DN12 ■ Vibration-resistant , screwed coil system • Increased leak-tightness with welded plunger guiding tube ■ Safe opening with hard-coupled piston system ■ Explosion proof versions Cable plug Cable plug Technical data
Abrir o catálogo na página 1
burkert Technical data, cont. Orifice Response times [ms]: Measured at the outlet with 6 bar inlet pressure at 20 °C Opening: Pressure build-up 0 to 90% Closing: Pressure decrease 100 to 10% Material DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Stopper Shading ring Armature guide tube Core Guide ring Springs Piston consists of: Steel (surface finish thick film passivated) (Brass version) Stainless steel 1.4305 PTFE (Stainless steel version) 1.4113 copper/silver 1.4303 1.4113 PTFE carbon filled 1.4310 ■ Brass/stainless steel 1.4305 ■ Stainless...
Abrir o catálogo na página 2
Threaded port
Abrir o catálogo na página 3
burkert Ordering chart for valves (other versions on request) 6240 valve with FKM seal material 6240 valve with Viton seal material, UL listed DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Circuit function 6240 valve with Viton seal material, UL recognized Circuit function 6240 valve with Viton seal material, USA version PD19 Circuit function 1) Overpressure to the atmospheric pressure Please note: The cable plug must be ordered separately (see page 3 or the datasheet for Type 2508)
Abrir o catálogo na página 4
DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 burkertOrdering chart for valves (other versions on request) High temperature version, all valves with PTFE/PEEK seal, stainless steel body, without cable plug 1) Overpressure to the atmospheric pressure Please note: The cable plug must be ordered separately (see page 3 or the datasheet for Type 2508)
Abrir o catálogo na página 5
DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 burkertOrdering chart for valves (other versions on request) High pressure version USA version (only PD19), all valves with PTEF/FKM seal, brass body, without cable plug
Abrir o catálogo na página 6
burkert Materials for ATEX/IECEx m DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Dimensions for ATEX/IECEx m [mm] Stopper Shading ring Armature guide tube Core Guide ring Springs Piston consists of Steel (surface finish thick film passivated) (Brass version) Stainless steel. 1.4305 PTFE (Stainless steel version) 1.4113 copper/silver 1.4303 1.4113 PTFE carbon filled 1.4310 • Brass/stainless steel 1.4305 • Stainless steel • PEEK • PTFE carbon filled • FKM/EPDM/PTFE (PTFE for high temps. and PTFE/FKM for high pressure version) Brass/stainless...
Abrir o catálogo na página 7
DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Ordering chart for ATEX/IECEx 6240 Ex m T4 with FKM seal and moulded cable (3 m) for single mounting The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 ° C, 100 ° C T5, T6 85 ° C), minus 5 K. ATEX and lECEx approval for coils with fixed cable outlet ATEX: PTB 14 ATEX 2023 X IECEx: IECEx PTB 14.0049 X
Abrir o catálogo na página 8
burkert Materials for ATEX/IECEx m junction box version DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Stopper Shading ring Armature guide tube Core Guideing ring Spring 1.4310 Safety lock: Complete piston includes: Steel (surface finished thick film passivated) (Brass version) Stainless steel 1.4305 PTFE (Stainless steel version) 1.4113 Copper/Silver 1.4303 1.4113 PTFE kohlegefullt PPS - Brass/stainless steel 1.4305 • Stainless steel - PEEK - PTFE oil-filled - FKM/EPDM/PTFE (PTFE for high temperatures and PTFE/FKM for high pressure versions)...
Abrir o catálogo na página 9
burkert Ordering chart for ATEX/IECEx junction box version 6240 Ex m T4 with FKM seal and junction box for single mounting DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 ° C, 100 ° C T5, T6 85 ° C), minus 5 K. ATEX and lECEx approval for the assembly of the coil and the junction box ATEX: EPS 16 ATEX 1046 X IECEx: IECEx EPS 16.0021 X Ex-Cable glands (polyamide version included in delivery / surcharge applied for brass nickel plated version Brass....
Abrir o catálogo na página 10
burkert j| Further versions on request Materials Seal: EPDM H Voltage Other operating voltages Port Connection NPT, Stainless steel version with G 3/8 connection Approvals Gas transportation DIN EN 3394-1 Ordering chart for accessories Cable plug Type 2508 according to DIN EN 175301-803 Form A The delivery of a cable plug includes the flat seal and the fixing screw. For other versions of cable plugs see data sheet Type 2508 Cable plug Type 2513 acc. to DIN EN 175301-803, Form A Meets the requirements of ATEX category 3 GD To find your nearest Burkert facility, click on the orange box In...
Abrir o catálogo na página 11Todos os catálogos e folhetos técnicos BÜRKERT FLUID CONTROL SYSTEMS
-
Type 0121
16 Páginas
-
Type 6240
26 Páginas
-
Type 8020
10 Páginas
-
Type 8026
12 Páginas
-
Type 8605
13 Páginas
-
Type 8692
18 Páginas
-
Type 5470
15 Páginas
-
8041
10 Páginas
-
Type 0498
6 Páginas
-
Type 8081
9 Páginas
-
Type 2300
32 Páginas
-
Type 8012
21 Páginas
-
Type 8110
11 Páginas
-
Type 8010
14 Páginas
-
8222
8 Páginas
-
Type 8137
12 Páginas
-
Typ 8804
12 Páginas
-
Product Overview MicroFluidics
18 Páginas
-
Proportional Valves
17 Páginas
-
Process and Control Valves
39 Páginas
-
Measurement devices
68 Páginas
-
ELEMENT On/Off and Control Valves
10 Páginas
-
S.EV series solenoid valves
16 Páginas
-
Pivoted armature valve 330
13 Páginas
-
Solenoid valves 6240
9 Páginas
-
Solenoid Valves
31 Páginas
-
Type 0301
4 Páginas
-
Type 0201
4 Páginas
-
Type 0300
6 Páginas
-
Type 0200
6 Páginas
-
Type 0131
4 Páginas
-
Type 0142
4 Páginas
-
Type 0117
3 Páginas
-
Type 0293
3 Páginas
-
Process & Control Valves
33 Páginas
-
Diaphragm Competence
14 Páginas
-
Standard Product Program
13 Páginas
-
AirLINE SP
2 Páginas
-
Uncompromising flow rate measurement
7 Páginas
-
multiCELL Type 8619
5 Páginas
-
Flowmeter Type 8045
4 Páginas
-
eControl Type 8611
2 Páginas
-
Dosing Systems
4 Páginas
-
Micro Valve: Whisper Valve
5 Páginas
-
Flipper Solenoid Valve Typ 6144
2 Páginas
-
TwinPower Valves Types 6624/6626
2 Páginas
-
Mass Flow Controllers for Gases
16 Páginas
-
Customized filtration solutions
8 Páginas
-
Industrie-Flyer Food_En
4 Páginas
-
Industrie-Flyer Dairy Process_En
2 Páginas
-
Saubere Umwelt durch reine Abgase_en
4 Páginas
-
Process Automation for Hygienic
2 Páginas
-
Kompetenz-Folder Membran-Kompetenz_En
12 Páginas
-
Application-Folder Druckguss_en
2 Páginas
-
CUT Product Line
9 Páginas
-
CATALOGUE BURKERT SELECT
88 Páginas
-
Product Overview Solenoid Control Valves
17 Páginas
-
Cooling Towers
2 Páginas
-
MicroFluidics
2 Páginas
-
Fuel Cell Tech
2 Páginas
-
Robot Welding
2 Páginas
-
Plastic Extruding
2 Páginas
-
Plastic Extrusion Lines
2 Páginas
-
Flyer Cooking
2 Páginas
-
Reverse Osmosis (Water Treatment)
2 Páginas
-
Injection Molding
2 Páginas
-
Heat Exchanger
2 Páginas
-
Clean Steam
2 Páginas
-
Media Filtration (Water Treatment)
2 Páginas
-
Flyer Control Cabinet Solutions
16 Páginas
-
Flyer Hygienic Processing Pharma
32 Páginas
-
Food and Beverage
32 Páginas
-
Industrial Inkjet Printing
2 Páginas
-
Segment Brochure Hygienic Processing
17 Páginas
-
Segment Brochure Gas Handling
17 Páginas
-
Systemhaus Brochure
8 Páginas
-
Company profile
15 Páginas
-
Product Catalogue:Bürkert Select
88 Páginas
-
Cooling Systems Brochure
16 Páginas
-
Water Treatment Brochure
16 Páginas
-
MicroFluidics Brochure
16 Páginas
-
steam products
16 Páginas
-
Product Overview Pneumatics
24 Páginas
-
Product overview Sensors
52 Páginas