
Excertos do catálogo

Rupture Disks BSBSystems.com | BSB.ie Visit our website for the most complete, up-to-date information Tank Car Rupture Disks The BS&B type TCTM rupture disk for railroad tank car service is designed to conform with ICC regulations. The highly accurate disk is adaptable to standard threaded or bolted type tank car fittings. If dimensions of tank car fittings are different from the ones shown, BS&B will design a special disk on request. Type TC tank car disks US patents 2,954,897; 3,698,598; and international patents apply The pressure zone of the TC disk is the slotted top section. fluoropolymer seal isolates the top section from contents of the tank. Vacuum support prevents excessive downward movement of the seal should the disk be subjected to vacuum during unloading or while the car is in transit. Vacuum support also protects the disk when the car is in transit or being “humped.” The tank car ring located on the atmospheric side of the disk protects controlled pressure zone of the disk even though ID • Available in standard AAR burst ratings • Simple installation • Accurate • Superior cycle life under pressure cycling conditions • Top section: Inconel® (alloy 600) • Vacuum support: 316 stainless steel • Tank car ring: 316 stainless steel • Gasket: fluoropolymer • Seal: fluoropolymer Special materials available on request Inconel® is a trademark of Inco Alloys International, Inc
Abrir o catálogo na página 1
The type SR-TC™ rupture disk is a surge-resistant rupture disk for railroad tank cars and over-the-road trailers. It is designed for direct installation on to standard threaded or bolted type tank car fittings and is available in standard AAR burst ratings. Type SR-TC rupture disks US patent 5,377,716 and international patents apply The SR-TC rupture disk will resist overpressure surges* of 125% to 140% of the rated burst pressure for up to 0.5 seconds duration. Greater surge protection may be expected for shorter surge duration. The SR-TC rupture disk offers extended disk service life...
Abrir o catálogo na página 2Todos os catálogos e folhetos técnicos BS&B SAFETY SYSTEMS
-
GLP-S™ Reverse Buckling Disk
2 Páginas
-
Union, Bolted, Quick-Sert™ Safety Heads
12 Páginas
-
LO-TO-FLO™ Safety Head
2 Páginas
-
SRI-7RS Pre-torqued Safety Head
2 Páginas
-
VENT-SAF™ Explosion Panels
4 Páginas
-
IQR SYSTEM™ Explosion Venting
4 Páginas
-
Industrial Explosion Protection
8 Páginas
-
Buckling Pin Relief Technology
12 Páginas
-
Burst Disk Monitors™ (BDM)
4 Páginas
-
Burst Alert® Sensor
4 Páginas
-
VIS-U-TEC™ Sensor
2 Páginas
-
Type D
8 Páginas
-
Tank Car Rupture Disks
2 Páginas
-
Rupture Disk
12 Páginas
-
Introduction to Rupture Disk
14 Páginas
-
Corporate Profile
20 Páginas
-
The VAC-SAF? System
12 Páginas
-
SAF-T-GRAF? Graphite Disks
4 Páginas
-
RB-90® Reverse Buckling Disks
4 Páginas
-
SURE-SAF? System
4 Páginas
-
ECO-SAF? System
8 Páginas
-
GCR-S? Reverse Buckling Disk
2 Páginas
-
BIO-SAF? System
16 Páginas
-
GCR-N? Reverse Buckling Disk
1 Páginas
-
GLP-S? Reverse Buckling Disk
2 Páginas
-
SmartSystem
4 Páginas
-
MRB series
1 Páginas
-
SIGMA, SIGMA EXL
4 Páginas
-
VENT-SAF? Explosion Vents
8 Páginas
-
EXPLOSION VENTING
4 Páginas
-
AVB
2 Páginas
-
Nu-Saf Plus
8 Páginas
-
Type B
8 Páginas
-
Conversion Factors
2 Páginas
-
SR-TC Rupture Disk
2 Páginas
-
Composite Bursting Disc Type D
12 Páginas
-
SKR-U Reverse Buckling Disk
4 Páginas
-
The STA-SAF System
12 Páginas
-
SKr™ Rupture Disk (Bursting Disc)
4 Páginas
-
BPRV™ Buckling Pin Relief Vent
8 Páginas
-
Mono Block Graphite Disks
8 Páginas