
Excertos do catálogo

Graphite Rupture Disks
Abrir o catálogo na página 1
SAF-T-GRAF System Introduction Saf-T-Graf® graphite Rupture Disks are manufactured from a single piece of high quality graphite that is impregnated with an environmentally safe high temperature resin to provide excellent leak performance. All Saf-T-Graf disks may be applied in gas, liquid or two phase flow. At the heart of the Saf-T-Graf product is its Monobloc construction; the rupture disk and holder are integral, designed for simple installation between companion flanges with no potential for leakage between separate disk and holder components. Depending upon the application, different...
Abrir o catálogo na página 2
Model MBTM , MBVTM, AMBTM, AMBVTM Monobloc disks fit most applications where graphite disks are needed. When using a monobloc disk in application: • Vacuum supports are needed for disks rated below 22 psig (1.52 bar) and where a vacuum condition exists. Model MBV or AMBV Vacuum supports are not required on 0.5” and 0.75” (15mm and 20mm) monobloc disks • Temperature ranges -100ºF to 400ºF (-73ºC to 205ºC). MBTM, MBVTM, AMBTM, AMBVTM Specifications Nominal Size Sizes 0.5” to 24” (15mm to 600 mm)with temperature range to 400ºF (205º C). Burst Ratings ANSI Flange Rating FSMTM, IMBTM, AIMBTM,...
Abrir o catálogo na página 3
Venting Capacities Venting capacities are expressed below in standard cubic feet per minute of air x 1000 at standard conditions. Adjustments must be made when utilizing vacuum supports. Vacuum Example: An 8" Monobloc disk (a 10 psig utilizing a bar type of vacuum support, reduces the original capacity by a factor of Venting capacities are based upon ASME VIII UG 131, using a 0.62 Disk Diameter (in/mm] coefficient of discharge*, ratio of specific heats of 1.4 and a "Z" (compressibility) of 1.0 which simulates an entry into a vent system from a process vessel. Below 15 psig the flow becomes...
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos BS&B SAFETY SYSTEMS
-
GLP-S™ Reverse Buckling Disk
2 Páginas
-
Union, Bolted, Quick-Sert™ Safety Heads
12 Páginas
-
LO-TO-FLO™ Safety Head
2 Páginas
-
SRI-7RS Pre-torqued Safety Head
2 Páginas
-
VENT-SAF™ Explosion Panels
4 Páginas
-
IQR SYSTEM™ Explosion Venting
4 Páginas
-
Industrial Explosion Protection
8 Páginas
-
Buckling Pin Relief Technology
12 Páginas
-
Burst Disk Monitors™ (BDM)
4 Páginas
-
Burst Alert® Sensor
4 Páginas
-
VIS-U-TEC™ Sensor
2 Páginas
-
Type D
8 Páginas
-
Tank Car Rupture Disks
2 Páginas
-
Rupture Disk
12 Páginas
-
Introduction to Rupture Disk
14 Páginas
-
Corporate Profile
20 Páginas
-
The VAC-SAF? System
12 Páginas
-
RB-90® Reverse Buckling Disks
4 Páginas
-
SURE-SAF? System
4 Páginas
-
ECO-SAF? System
8 Páginas
-
GCR-S? Reverse Buckling Disk
2 Páginas
-
BIO-SAF? System
16 Páginas
-
GCR-N? Reverse Buckling Disk
1 Páginas
-
GLP-S? Reverse Buckling Disk
2 Páginas
-
SmartSystem
4 Páginas
-
MRB series
1 Páginas
-
SIGMA, SIGMA EXL
4 Páginas
-
VENT-SAF? Explosion Vents
8 Páginas
-
EXPLOSION VENTING
4 Páginas
-
AVB
2 Páginas
-
Nu-Saf Plus
8 Páginas
-
Type B
8 Páginas
-
Conversion Factors
2 Páginas
-
SR-TC Rupture Disk
2 Páginas
-
Composite Bursting Disc Type D
12 Páginas
-
SKR-U Reverse Buckling Disk
4 Páginas
-
The STA-SAF System
12 Páginas
-
SKr™ Rupture Disk (Bursting Disc)
4 Páginas
-
BPRV™ Buckling Pin Relief Vent
8 Páginas
-
Mono Block Graphite Disks
8 Páginas