
Excertos do catálogo

EXPLOSION VENTING IQR SYSTEM™ BS&B PRESSURE SAFETY MANAGEMENT, L.L.C. FLAME, DUST and PRESSURE CONTROL • INTERCEPTS • QUENCHES • RETAINS
Abrir o catálogo na página 1
Flame Arresting – No flame escapes providing a safe operating environment for personnel. Eliminates the possibility of a secondary ignition and subsequent explosion external to the protected equipment. Dust Retention – Retains process product removing the possibility of potentially toxic product entering the environment. Pressure Retention – Absorbs explosion pressure peak, protects personnel and surrounding environment from pressure blast. Temperature Control – Absorbs fireball with negligible temperature rise in surrounding environment. HOW THE IQR SYSTEM™ WORKS The IQR system comprises...
Abrir o catálogo na página 2
INFORMATION REQUIRED TO SPECIFY THE IQR SYSTEM™ The IQR System is an explosion venting device. The following information is required to select and specify the correct IQR unit for your application. Process Dust (Kst and Pmax) Process Equipment Description (Volume(s)); preferably drawings including inlet and outlet connections. Normal operating pressure and temperature Protection pressure for process equipment (Pred) Should this information be unavailable, let BS&B’s technical sales personnel review your application with you.
Abrir o catálogo na página 3
U.S. CUSTOMARY UNITS Type I.D. H in. in. Connection Flange number (n) and diameter (d) of bolt holes (see table) 1. Explosion vent with integral Burst Alert® Sensor 2. IQR Monitor that provides signal upon activation for process shut down. 3. Eyebolts for lifting and support after installation (if required) Dimension A is the external diameter of the IQR unit. INSTALLATION, INSPECTION AND MAINTENANCE The IQR System is simply installed by a bolted flange connection at its inlet, just as an explosion vent would by applied. Installation may be in any convenient location. In the case of larger...
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos BS&B SAFETY SYSTEMS
-
GLP-S™ Reverse Buckling Disk
2 Páginas
-
Union, Bolted, Quick-Sert™ Safety Heads
12 Páginas
-
LO-TO-FLO™ Safety Head
2 Páginas
-
SRI-7RS Pre-torqued Safety Head
2 Páginas
-
VENT-SAF™ Explosion Panels
4 Páginas
-
IQR SYSTEM™ Explosion Venting
4 Páginas
-
Industrial Explosion Protection
8 Páginas
-
Buckling Pin Relief Technology
12 Páginas
-
Burst Disk Monitors™ (BDM)
4 Páginas
-
Burst Alert® Sensor
4 Páginas
-
VIS-U-TEC™ Sensor
2 Páginas
-
Type D
8 Páginas
-
Tank Car Rupture Disks
2 Páginas
-
Rupture Disk
12 Páginas
-
Introduction to Rupture Disk
14 Páginas
-
Corporate Profile
20 Páginas
-
The VAC-SAF? System
12 Páginas
-
SAF-T-GRAF? Graphite Disks
4 Páginas
-
RB-90® Reverse Buckling Disks
4 Páginas
-
SURE-SAF? System
4 Páginas
-
ECO-SAF? System
8 Páginas
-
GCR-S? Reverse Buckling Disk
2 Páginas
-
BIO-SAF? System
16 Páginas
-
GCR-N? Reverse Buckling Disk
1 Páginas
-
GLP-S? Reverse Buckling Disk
2 Páginas
-
SmartSystem
4 Páginas
-
MRB series
1 Páginas
-
SIGMA, SIGMA EXL
4 Páginas
-
VENT-SAF? Explosion Vents
8 Páginas
-
AVB
2 Páginas
-
Nu-Saf Plus
8 Páginas
-
Type B
8 Páginas
-
Conversion Factors
2 Páginas
-
SR-TC Rupture Disk
2 Páginas
-
Composite Bursting Disc Type D
12 Páginas
-
SKR-U Reverse Buckling Disk
4 Páginas
-
The STA-SAF System
12 Páginas
-
SKr™ Rupture Disk (Bursting Disc)
4 Páginas
-
BPRV™ Buckling Pin Relief Vent
8 Páginas
-
Mono Block Graphite Disks
8 Páginas