Catálogos >
Beijer Electronics >
JetCon 1101 - data sheet

JetCon 1101 - data sheet
1 / 3Páginas

Excertos do catálogo

■ USB / RS-232 DTE and DCE Connection ■ Fully RS-232C Signals with Hand-shaking ■ USB 1.1/1.2/2.0 compatible ■ 921.6 Kbps High Speed Serial ■ 12Mbps USB Data Throughput ■ 15KV Human Body ESD protection ■ 5KV Isolation for Medical Electrical Equipment ■ -30~75oC wide operating temperature | Overview As digital technology advances and light-weight design requirements, more and more computer equipment does not support the traditional communication interface and change to USB (Universal Serial Bus technology) interface. The USB technology simplifies digital system design and support more number of communication interfaces, but also erected fences to traditional equipment isolation. Will challenge many automated control integration industry, the integration of old and new equipment, and approached full system function. Through the JetCon 1101 and JetCon1101i USB to Serial RS-232 Converter, the system integrator will be able to reduce the system integrate troubles, and make integration becomes easy and simply. The JetCon 1101 / JetCon 1101i supports USB 2.0 interface and supports one RS-232C serial interface with 921.6Kbps throughput. It provides RS-232 handshaking mechanism for flow control function enabled to connect Data Communication Equipment, like as PSTN modem, or Programmable Logic Control device which needs flow control. The serial interface supports fully communication parameters which can be configured by operating system- Windows, Macintosh and Linux systems. A Beijer Electronics Group Company

Abrir o catálogo na página 1

Industrial Media Converter Higher Electrical Magnetic Immunity In some application environment, it is very sensitive for the electrical magnetic interference. The noise may conducted or emitted by power system or data signal system. Therefore, the place like as research Lab, Hospital is usually restricted to connect equipment with non certified device. The JetCon 1101i provides 5KV isolation design on the USB and the power system, which provides more safety connection for adding serial communication on sensitive equipment which with USB extension port only. Industrial Intelligent NMS...

Abrir o catálogo na página 2

Technology Standard: EIA/TIA-232, RS-232 (ITU-T v.28) System performance Forwarding Rate: USB 2.0 Slave with 12Mbps data throughput RS-232 baud rate up to 921.6Kbps FIFO Buffer: Transmit Buffer: 128Bytes Receive Buffer: 256Bytes Interface Connector: USB: Mini USB slave , B-Type Serial: DB-9, Female Connection Distance: USB:5 Meters RS-232 Serial: 15 Meters Serial Parameters: Length of Data bit: 7, 8 bits Stop bit:1,2 Type of parity check: None, Even, Odd, Space, Mark Type of Flow Control: RTS/ CTS, XON/ XOFF Serial Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND System LED: TX Blinking...

Abrir o catálogo na página 3