Catálogos >
BCM SENSOR TECHNOLOGIES bv >
1211/1291 Cylindrical Compression Load Cells

1211/1291 Cylindrical Compression Load Cells
1 / 3Páginas

Excertos do catálogo

1211/1291 Cylindrical Compression Load Cells - 1

Model 1211/1291 Compression Load Cells Features - low profile - capacity from 1t to 10t - sensor material: ALSI 4340 (1211) or 17-4PH (1291) - accuracy up to 0.1%fs - environment protection up to IP68 Applications - bolt stress measurement - clamping force measurement - weithing system Description This load cells are designed for compressive force measurements where the space is limited. These products can be used either as load washers or compression load cells. Model 1211/1291 offers a low profile design for high capacity applications. The capacity of the load cells ranges up to 10t. The measuring accuracy of this model is up to 0.1%fs. It can also be provided with OIML accuracy class. The 1211 is made of AISI 4340 mild steel while the 1291 is made of 17-4PH stainless steel and are rugged in design. The typical applications of the load cells include bolt stresses measurement, clamping forces measurement, and weighing systems. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.

Abrir o catálogo na página 1

1211/1291 Cylindrical Compression Load Cells - 2

Model 1211/1291 Compression Load Cells Technical Data Parameter safe load limit ultimate overload zero unbalance combined error excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of span temp. coefficient of zero load cell body material mechanical interface refer to the dimensions on the datasheets electrical interface Φ5, 4-conductor shielded, PVC jacket, 5m length environment protection unit weight The listed specifications are subject to change without prior notice....

Abrir o catálogo na página 2

1211/1291 Cylindrical Compression Load Cells - 3

Model 1211/1291 Compression Load Cells Ordering Information position (pos.) 1: model 1211 1291 pos. 2: capacity 1t 2t 3t 5t 7t pos. 3: output sensitivity 2 mV/V pos. 4: combined error 0.1%fs 0.2%fs (standard) 0.5%fs pos. 5: bridge resistance 700Ω (Rin = 700±10Ω, Rout = 700±10Ω) pos. 6: threads NA*. In case of “NA”, pos.6 can be omitted from the ordering code. pos. 7: electrical interface 5/4/PVC/L = Φ5 mm, 4-conductors shielded, PVC, length = 5m** pos. 8: environment protection IP67 (standard), IP68 pos. 9: accessories for installation NA. In case of “NA”, pos.9 can be omitted. pos. 10:...

Abrir o catálogo na página 3