Catálogos >
Bausch Datacom >
DinBox GPRS SL (DB GPRS SL)

DinBox GPRS SL (DB GPRS SL)
1 / 2Páginas

Excertos do catálogo

Smart Modem Communication for the Industry and Energy market Designed by Bausch Datacom! Dinrail GSM / GPRS smart modem The DinBox GPRS SL modem is a serial V.24 RS-232/RS485 modem in a DINrail housing. The modem is DC powered and can be equipped with several metering and/or SCADA protocols. CSD GSM data, GPRS IP socket server & client modes are possible. The modem is an ideal solution for RS-232/485 interfacing to PLC, metering devices, power quality measurement equipment and others. Bausch Datacom specializes in integrating applications, protocols and TCP/IP protocol stack in its modems. At the heart of the DinBox GPRS SL modem, the SL6087 Sierra GPRS Wireless module supports a powerful software development environment - OpenAT -, which allows embedded ANSI C applications to be executed directly on the Wireless CPU. This means that Bausch Datacom can integrate tailor made applications or communication protocols on the customer's demand, a very powerful tool! Protocols such as IEC 60870-5-104, Modbus or others can thus be implemented in the modem. The standard DinBox GPRS SL modem firmware in OpenAT supports modem grouping and mass deployment services, offered by the ‘Praxis’ MMS (Bausch Modem Management System). Praxis provides for scheduled and grouped updating of modem firmware over the air, switching of modems in group from GSM data to GPRS or vice versa, based on information from the modems in the field about signal strength (rssi, bit error rate…), cost based and scheduled switching between different AMR metering scenario's (Socket Client or Server Mode, CSD mode, GPRS mode…), setting of a different baudrate (between modem and meter) or modem configuration (APN name,...). Even secure communication with the back-office can be set up by adding RSA encryption code to the embedded software of the modem. Basically the modem firmware allows the modem to be connected by RS-232 and/or RS-485 (2/4 wire) to 2 or more non-IP enabled (electricity) meters and to communicate however by IP number and port number using GPRS. In this way a transparent communication with the host system can be maintained! Typical Applications ° Power quality communication ° Remote AMR communication ° Upgrade of non IP-enabled meters and loggers ° Vending machine monitoring ° Surveillance systems ° Point of Sales Product Highlights ° Configurable watchdog reset (1-168 hour). ° Standard firmware allows Praxis modem grouping and mass deployment services and communication with meters without IP stack ° Optional firmware: IEC 60870-5-104, Modbus… ° FOTA modem firmware upgrade over the Air ° AirVantageTM mass deployment services BAUSCH DATACOM Bausch Datacom NV/SA Tel.: Int 32(0)16 46 12 88 http://www.bausch.eu Tiensesteenweg 54/56 Fax: Int 32(0)16 46 31 51 http://www.bauschdatacom.be B-3360 Korbeek-Lo Belgium E-ma

Abrir o catálogo na página 1

DinBox GPRS SL hardware specifications The DinBox GPRS SL is a smart modem, built inside a Phoenix Dinrail housing with a Sierra Wireless GSM / GPRS CPU, DC power supply and configurable watchdog. The modem comes with logically separated RS-232 & 2/4 wire RS-485 interfaces. Housing DTE interfaces ° Complete RS-232 interface, galvanically separated, connected to UART1 of the GPRS module. RJ-45 (8x8) connector (DCD, RxD, TxD, DTR, GND, RI, RTS and CTS) ° RS-485 interface, configurable in 2- or 4wire by jumper settings, galvanically separated, connected to UART2 of the GPRS module. ° Standard...

Abrir o catálogo na página 2