Catálogos >
Balluff GmbH >
MAGNETIC FIELD SENSORS

MAGNETIC FIELD SENSORS
1 / 7Páginas

Adicionar aos Favoritos

Excertos do catálogo

Magnetic, flexible, reliable MAGNETIC FIELD SENSORS

Abrir o catálogo na página 1

2 | Magnetic Field Sensors Magnetic Field Sensors | 3 Magnetic field sensors – magnetic, flexible, reliable Which sensor is ideal for your application? Reliable, wear-free position detection on all pneumatic cylinders Magnetic field sensors are used chiefly on cylinders and grippers for monitoring the piston position. The sensor detects the field of the magnet embedded in the piston through the actuator wall. Thanks to the non-contact position detection principle, electronic magnetic field sensors from Balluff work reliably and wear-free: no contact erosion, no bounce, no sticking and just...

Abrir o catálogo na página 2

4 | Magnetic Field Sensors Magnetic Field Sensors | 5 Magnetic field sensors for T- and C-slots Single-connector version with two magnetic field sensors – a clever and cost-effective connector concept BMF 235 5.5×5×23.5 Can be installed from above – The new standard for T-slots – Extremely short design – Very bright LED – Secure hold in any T-slot Series Dimensions in mm (H×W×L) Unique features Part numbering for the most common types This selection includes PNP normally open versions M8 plug with 30 cm cable BMF00C4 Cable version with 2 m PUR cable BMF00AR V-Twin, M8 plug with 30 cm cable...

Abrir o catálogo na página 3

6 | Magnetic Field Sensors Magnetic Field Sensors | 7 Magnetic field sensors for multiple slot shapes Captive switchpoint BMF 303 4.5×2.9×21.6 For miniaturized actuators – Highest precision – Disappears in the slot – Version for radial magnets available, see page 9 BMF 305 10.5×6.5×33.5 For larger actuators also in these versions: – Weld field immune, page 10 – Metal housing, page 10 – High temperature rated, page 8 BMF 103 system 16×2.8×4.9 Optimized for short stroke cylinders and mini-grippers – Shortest cylinder switch on the market – Version for radial magnets available, see page 9...

Abrir o catálogo na página 4

8 | Magnetic Field Sensors Magnetic Field Sensors | 9 Weld field immune magnetic field sensors Magnetic field sensors for special applications Unique features – Immune to magnetic field interference caused by high welding currents – IO-Link 1.1 – Configurable noise suppression time – Status monitoring over IO-Link – Can be installed in the T-slot from above TPU cable, orange M8 plug with 30 cm cable M12 plug with 30 cm cable TPU cable, black M8 plug with 30 cm cable M12 plug with 30 cm cable Silicon cable M8 plug with 30 cm cable M12 plug with 30 cm cable BMF 415 Standard (PNP normally...

Abrir o catálogo na página 5

10 | Magnetic Field Sensors Magnetic Field Sensors | 11 Magnetic field sensors with adjustable switchpoints Magnetic field positioning system BMF teachable, for C-slot – Compact design – Generous teach range of 60 mm – One sensor with up to 8 switchpoints (IO-Link version) – Can be installed in any C-slot from above Series Unique features Ordering codes for the most common types IO-Link version with M12 plug with 30 cm cable PNP normally open with M8 plug with 30 cm cable BMF teachable, for T-slot – Compact form factor – Generous teach range of 60 mm – One sensor with up to 8 switchpoints...

Abrir o catálogo na página 6

12 | Magnetic Field Sensors Headquarters Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a. d. F. Germany Phone +49 7158 173-0 Fax +49 7158 5010 balluff@balluff.de Doc.-No. 951089 · EN · J20 · Subject to changes. CONTACT OUR WORLDWIDE SUBSIDIA

Abrir o catálogo na página 7