FIBER OPENING AND BLENDING
1 / 12Páginas

FIBER OPENING AUTEFA Solutions leads the way

AUTEFA SOLUTIONS – Experience, Know-How and Competence in Nonwoven Technology AUTEFA Solutions leads the way AUTEFA Solutions represents companies with a long tradition and a history of years of successful participation in the market. Combining the experience of the companies AUTEFA, Fehrer, FOR and Strahm the company stands for high quality, durability and performance made in Europe. AUTEFA Solutions creates innovative technological concepts for nonwoven products by utilizing the skills and practical experience of its employees. The customers benefit from the dynamic flexibility and...

AUTEFA Solutions leads the way to Fiber Opening and Blending AUTEFA Solutions offers complete carding lines, starting from bale opening up to finished products. All process steps base on approved and economics technologies which are integrated in turnkey solutions. The composition of a blending line, as well as the type and configuration of each machine, is flexible and can vary according the fibers to be processed and the final product to be manufactured. Each line is configured on customer needs to reach the best efficiency required by the process.

Bale opener CED The Bale Opener CED is suitable for any kind of fibers, of short and medium length. It is complete with double horizontal conveyor and can be loaded with full bales, of any dimension and weight. The opening of the bales is done by a spiked apron in PVC with internal slats with galvanized steel pins and driven by an inverter. The combing roller and the discharge roller are of large diameter and driven by an independent motor gear boxes. The Bale Opener CED can be equipped with a Weighing Pan with electronic load cells for dosing the fibers. The pan is supported by two...

Line for low melt fibers This Blending Box has two scopes: first of all, it is able to do the final blending and second, it is able to provide some storage between the blending line and the card. So that any small problems on the blending does not affect the running of the following machines and vice versa. It can be used for re-feeding the side wastes and the reclaimed off quality products. This line is designed to open very well the low melt fibers before weighing process. A good opening of the low melt fibers allows a better mixing of the low melt fibers with the standard fibers with...

Vertical fine opener VFO WORKING WIDTH: 1500 – 1900 – 2500 mm PRODUCTION CAPACITY: FROM 500 UP TO 2000 kg/h WORKING WIDTH: 1500 – 2000 – 2500 mm PRODUCTION CAPACITY: FROM 500 UP TO 2000 kg/h The Vertical Fine Opener VFO opens intensive up to a degree of 95 %. The opener is expressly designed for the opening of all kinds of medium and long fibers (Fiber specification from 40 mm to 150 mm, from 1.7 den to 110 den) The Fine Openers FTO is probably the best fine opener available on the market, it is capable of an intensive opener (up to a degree of 95 %) and is expressly designed for the needs...

Emulsion applicatior Edge trim opener The Emulsion Applicator in the pipe allows to apply chemical additives to the fibers. The chemical additive is usually a blend of different oils (oleine, antistatic, etc.) and water, shacked in The Emulsion Applicator is composed of a set of 2 nozzles, by which the emulsion (previously prepared in our emulsion device included in the supply) is applied to the fibers. According to the type of edge trim and side waste the con- figuration of the Edge Trim Opener can be modified. The drum can be covered with plywood lags with hardened steel pins or rigid...

AUTEFA SOLUTIONS ITALY S.P.A. Str. Campagnè, 16 · 13900 Biella · Italy T: +39 015 8484111 · F: +39 015 8491880 www.autefa.com · italy@autefa.c