
Excertos do catálogo

Multi-turn gearboxes for motor operation of gate valves and globe valves GHT 360.1 Torques up to 80,000 Nm Information
Abrir o catálogo na página 1
Multi-turn gearboxes Where a large fluid flow has to pass through a pipeline under high pressure, an actuator with high output torque is necessary to operate the required high pressure gate valve. An example would be in a large power plant where large quantities of vapour at a pressure of 250 bar or more are transported from the boiler to the turbines or within the feedwater supply of the steam generating boiler. With the SA 07.1 – SA 48.1 multi-turn actuators, AUMA covers a torque range of up to 32,000 Nm. Torques up to 80,000 Nm can be achieved by combining an AUMA multi-turn actuator...
Abrir o catálogo na página 2
RR [5] [6a] [4] [1] LL [6b] [2] [3] 2010-09-06 [1] Housing In the basic version, the housing is produced from high quality spheroidal cast iron to be able to withstand the high loads during the entire operation. [2] Valve attachment ■ ■ The valve attachment consists of: the mounting flange for mounting the gearbox to the valve and the output drive for transmitting torque to the valve stem. The following output drives are available: ■ B2 (standard) This output drive is integrated into the hollow shaft of the gearbox. The torque is transmitted via a parallel key. ■ A or AF Stem nut for...
Abrir o catálogo na página 3
[1] Multi-turn actuators SA 07.2 – SA 16.2/SA 25.1 – SA 48.1 Torques from 10 to 32,000 Nm Output speeds from 4 to 180 rpm [2] Multi-turn actuators SA/SAR with controls AUMATIC Torques from 10 to 1,000 Nm Output speeds from 4 to 180 rpm [3] Linear actuators SA/LE Combination of multi-turn actuator SA with linear thrust unit LE Thrusts from 4 kN to 217 kN Strokes up to 500 mm Linear speeds from 20 to 360 mm/min [4] Part-turn actuators SG 05.1 – SG 12.1 Torques from 100 to 1,200 Nm Operating times for 90° from 4 to 180 s [5] Part-turn actuators SA/GS Combination of multi-turn actuator SA with...
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos AUMA
-
ELECTRIC ACTUATORS
6 Páginas
-
Multi-turn actuators
92 Páginas
-
Electric multi-turn actuators
40 Páginas
-
SAEx 07.2
1 Páginas
-
FUNCTIONAL SAFETY – SIL
28 Páginas
-
Service Worldwide
8 Páginas
-
SIMA² Master Station
6 Páginas
-
AUMA Cloud + AUMA Assistant App
14 Páginas
-
AUMA Support App
4 Páginas
-
electric actuators
56 Páginas
-
FUNCTIONAL SAFETY SIL
28 Páginas
-
ELECTRIC MULTI-TURN ACTUATORS
8 Páginas
-
AUMA actuators and valve gearboxes
16 Páginas
-
Service world wide
12 Páginas
-
Part-turn actuators Generation .2
6 Páginas
-
Explosions proof actuators
24 Páginas
-
The Actuator Specialist
32 Páginas
Catálogos arquivados
-
Test bench PV 1405
24 Páginas
-
Service device PV 788 B
4 Páginas
-
Electric part-turn actuators
4 Páginas
-
Electric multi-turn actuators
28 Páginas
-
Electric multi-turn actuators
24 Páginas
-
Lever actuators SGF 05.1 - 12.1
4 Páginas
-
Lever gearboxes GF 50.3 - 250.3
4 Páginas
-
Actuators with fieldbus interface
32 Páginas
-
Master station SIMA
4 Páginas