Catálogos >
AUMA >
Electric actuators with wireless interface

Electric actuators with wireless interface
1 / 4Páginas

Excertos do catálogo

Electric actuators with wireless interface - 1

Electric actuators with wireless interface Information

Electric actuators with wireless interface - 2

Wireless - Communication for the future The advantages for using wireless information transmission are striking - no controls wiring required and easy to extend, combined with redundant transmission paths. This is the reason why wireless transmission of measurement values to the DCS has been implemented in recent years. Today, AUMA offers actuators equipped with wireless interface, not merely used for wireless transmission of feedback signals from the actuators or between valve and remote control centre but furthermore even for transmission of operation commands to the actuator....

Abrir o catálogo na página 2

Electric actuators with wireless interface - 3

[1] 2012-10-29 12-10-29 0 [3] [3] SIMA Master Station SIMA Master Station is equipped with a standardised and intuitive user interface. It allows fast and easy overview of the status of the complete network, including actuators and valves. Multiple configuration facilities of interfaces allow easy integration within any DCS. to the control room only comprises signals required for regular operation. ■ In the event of failure, the SIMA as diagnostic tool supports fast fault identification and remedy. SIMA as commissioning system allows for independent commissioning of the connected actuator...

Abrir o catálogo na página 3

Electric actuators with wireless interface - 4

[1] Multi-turn actuators SA 07.2 – SA 16.2 SA 25.1 – SA 48.1 Torques from 10 to 32,000 Nm Output speeds from 4 to 180 rpm [2] Multi-turn actuators SA/SAR with controls AUMATIC Torques from 10 to 1,000 Nm Output speeds from 4 to 180 rpm [3] Linear actuators SA/LE Combination of multi-turn actuator SA and linear thrust unit LE Thrusts from 4 kN to 217 kN Strokes up to 500 mm Linear speeds from 20 to 360 mm/min [4] Part-turn actuators SQ 05.2 – SQ 14.2 Torques from 50 to 2,400 Nm Operating times for 90° from 4 to 100 s [5] Part-turn actuators SA/GS Combination of multi-turn actuator SA and...

Abrir o catálogo na página 4