Catálogos >
ASM Automation Sensorik Messtechnik GmbH >
WBT61

WBT61
1 / 7Páginas

Excertos do catálogo

positape® Tape Extension Position Sensors WBT61 Combined displacement and inclination sensor with measurement ranges up to 4,000 mm / ± 180º Robust stainless steel measurement tape Multiple deflections possible With magnetic absolute encoder With inclination sensor in MEMS technology Redundant version available Product version Digital ou

Abrir o catálogo na página 1

WBT61 - Combined displacement and inclination sensor Version with digital output CANopen Specifications Order options Measurement range (position) Measurement range (inclination) Inclination axis Digital output CANopen Digital output CANopen, redundant MCANOP MCANOPR Linearity of position measurement Linearity of inclination measurement Sensing device (position measurement) Magnetic absolute encoder Sensing device (inclination measurement) MEMS device PBT, stainless steel Tape: stainless steel, 10 mm wide, 0,08 mm thick Protection class Dust wiper Temperature range approx. 600 g with...

Abrir o catálogo na página 2

A – Connector M12 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory.

Abrir o catálogo na página 3

Mounting options for inclination measurement for WBT61 / WBT85 sensors The mounting option can be set by the user via software. Sensor position as shown equals 0°. Output signal

Abrir o catálogo na página 4

Interface CANopen MCANOP, CANOPR Encoder profile Error Control Node Guarding, Heartbeat, Emergency Message 3 TxPDO, 0 RxPDO, no linking, static mapping Event-/Time triggered, Remote-request, Sync cyclic/acyclic Transmission rate 50 kBit bis 1 Mbit, adjustable via LSS or SDO, default: 125 kBit Integrated bus terminating resistor Excitation voltage Excitation current Measuring rate Stability (temperature) Operating temperature See specification of the respective sensor Reverse polarity, short circuit Dielectric strength Output signals Signal wiring Connector M12, 5 pin Communication profile...

Abrir o catálogo na página 5

Accessories Connector/bus cable M12, 5 pin CAN-Bus The 5-lead shielded cable is supplied with a female 5 pin M12 connector at one end and a male 5 pin M12 connector at the other end. Available lengths are 0.3 m, 2 m, 5 and 10 m. Cable diameter: 6.7 ±0.2 mm Order code T-connector for bus cable M12, 5 pin CAN-Bus Order code Terminating resistor M12, 5 pin CAN-Bus Order code Applicable for cable carriers Maximum movement speed Maximum acceleration Minimum bending radius

Abrir o catálogo na página 6