CRM200
1 / 39Páginas

Excertos do catálogo

SILICON# SENSING. www.siliconsensing.com pinpoint® Precision Navigation and Pointing Gyroscope CRM200 Technical Datasheet Features • Small (6.3 x 5.5 x 2.7mm) • Proven and robust silicon MEMS vibrating ring gyro • Low bias instability (12°/hr) over short integration period (<1s) • Low Angular Random Walk (0.2°/Vhr) • In-plane, orthogonal and 20° inclined sensing options (CRM100 and CRM200) • User selectable dynamic ranges; 75°/s, 150°/s, 300°/s and 900°/s (maximum 1,000°/s) • Analogue and Digital ( SPI® ) output modes • User adjustable bandwidth to 160Hz • 3V nominal supply (2.7 - 3.6V range) • Low power consumption (4mA) • High shock and vibration rejection • Hermetically sealed ceramic LCC surface mount package for temperature and humidity resistance • Integral temperature sensor • Low integration cost • Design tools and resources available • RoHS compliant • AEC Q100 tested Applications • Automotive in-car navigation • Precision GPS vehicle and personal navigation aiding • Vehicle yaw, pitch and roll rate sensing • Gesture sensing • Motion tracking • Pointing devices • Precision agriculture • Antenna stabilisation • Industrial and robotics 1 General Description PinPoint® is a single-axis MEMS angular rate sensor (gyro) capable of measuring angular velocity up to a maximum of ±1,000°/s which has two output modes; an analogue voltage signal which is linearly proportional to angular speed, and a digital signal in SPI® protocol. The choice of output mode; analogue or digital, is determined by the user when connecting it to the user’s host PCBA; details of the electrical interface between PinPoint® and the host PCBA are given in Section 7. PinPoint® is available in several configurations; a) CRM100 which measures angular velocity about an axis perpendicular to the plane of the host PCBA, referred to as ‘in-plane’ sensing, b) CRM200 which measures angular velocity about an axis which is parallel to the plane of the host PCBA, referred to as ‘orthogonal’ sensing and c) CRM102 and CRM202 which are capable of measuring angular velocities in excess of ±2700°/s. With a combination of CRM100 and CRM200 it is possible for the user to measure angular rate of multiple axes (e.g. any combination of pitch, yaw and roll) from a single host PCBA. PinPoint® is supplied as a PCBA surface mountable LCC ceramic packaged device. It comprises five main components; silicon MEMS ring Sensor, Pedestal, ASIC, Package Base and Lid. More details of the construction are given in Section 13. There are eight actuators / transducers distributed evenly around the perimeter of the silicon MEMS ring. Located about its primary axes are a single pair of ‘primary drive’ actuators and a single pair of ‘primary pick-off’ transducers. Located about its secondary axes (at 45° to the primary) are two pairs of ‘secondary pick-off’ transducers see Figure 1.1. The ‘primary drive’ actuators and ‘primary pick-off’ transducers act together in a closed-loop system to excite and control the ring primary operating vibration amplitude and frequency. Secondary ‘pick-off’ transducers detect radial movement at the secondary axes, the magnitude of which is proportional to the angular speed of rotation and from which the gyro derives angular rate. More information about the principles of operation are given in Section 13. © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company. Specification subject to change without notice. CRM200-00-0100-132 Rev 9 Page 1

Abrir o catálogo na página 1

Precision Navigation and Pointing Gyroscope Technical Datasheet PROG Calibration Reset Trim Sets Interface Control Data_Out / BIT_Out Figure 1.1 CRM200 Functional Block Diagram Figure 1.2 CRM200 Overall Dimensions © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company. Specification subject to change without notice.

Abrir o catálogo na página 2

SILICON** SENSING. www.siliconsensing.com pinpoint® Precision Navigation and Pointing Gyroscope CRM200 Technical Datasheet2 Ordering Information Part Number 3 Specification Unless stated otherwise, the following specification values assume Vdd = 3.0V and an ambient temperature of +25°C. ‘Over temperature’ refers to the temperature range -40°C to +85°C. © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company. Specification subject to change without notice. CRM200-00-0100-132 Rev...

Abrir o catálogo na página 3

SILICON# SENSING. www.siliconsensing.com pinpoint® Precision Navigation and Pointing Gyroscope CRM200 Technical DatasheetSpecification Continued Parameter © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company. Specification subject to change without notice. Page 4 CRM200-00-0100-132 Rev 9 Competitive sensor & power supply so

Abrir o catálogo na página 4

SILICON# SENSING. www.siliconsensing.com pinpoint® Precision Navigation and Pointing Gyroscope CRM200 Technical DatasheetSpecification Continued Parameter © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company. Specification subject to change without notice. CRM200-00-0100-132 Rev 9 Page 5 Competitive sensor & power supply solutions worldwide

Abrir o catálogo na página 5

SILICON# SENSING. www.siliconsensing.com pinpoint® Precision Navigation and Pointing Gyroscope Technical Datasheet4 Absolute Minimum/Maximum Ratings Notes: Improper handling, such as dropping onto hard surfaces, can generate every high shock levels in excess of 10,000g. The resultant stresses can cause permanent damage to the sensor. Exposure to the Absolute Maximum Ratings for extended periods may affect performance and reliability. © Copyright 2015 Silicon Sensing Systems Limited. All rights reserved. Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint...

Abrir o catálogo na página 6

CRM200 1 / 39Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos Angst+Pfister Sensors and Power AG

CRM200
1 / 39Páginas