Catálogos >
Analog Devices >
HMC853 Data Sheet

HMC853 Data Sheet
1 / 10Páginas

Excertos do catálogo

MICROWAVE PRODUCTS FROM ANALOG DEVICES Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Abrir o catálogo na página 1

THIS PAGE INTENTIONALLY LEFT BLANK

Abrir o catálogo na página 2

28 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Features High Speed Logic - SMT Typical Applications Differential & Single-Ended Operation Fast Rise and Fall Times: 15/14 ps • Broadband Test & Measurement • Serial Data Transmission up to 28 Gbps Programmable Differential Output Voltage Swing: 700 - 1300 mVp-p • Digital Logic Systems up to 28 GHz Single Supply: -3.3 V 16 Lead Ceramic 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description The HMC853LC3 is a D-Type Flip-Flop designed to support data transmission rates of up to 28 Gbps, and clock frequencies as high as 28...

Abrir o catálogo na página 3

28 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Electrical Specifications (continued) Conditions Output Rise / Fall Time Output Return Loss Propagation Delay Clock to Data, td Clock Phase Margin Set Up Time, ts Hold Time, th Output Differential Voltage vs. Supply Voltage [1][2] DC Current vs. Supply Voltage [1][2] 100 VOUT DIFFERENTIAL (mVp-p) peak-to-peak, 215 -1 PRBS input [1] High Speed Logic - SMT Output Differential Voltage vs. VR [2][3] VOUT DIFFERENTIAL (mVp-p) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824...

Abrir o catálogo na página 4

28 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Rise / Fall Time vs. Supply Voltage [1][2] Rise / Fall Time vs. VR [2][4] 20 Input Return Loss vs. Frequency [1][3][4] Output Return Loss vs. Frequency [1][3][4] 0 Eval Board Device Eval Board Device High Speed Logic - SMT [3] Device measured on evaluation board with single-ended time domain gating. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or...

Abrir o catálogo na página 5

28 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Eye Diagram @ 25 Gbps Conditions Pattern Length Vertical Scale Time Scale Test Conditions: Pattern generated with a 27-1 PN generator at 25 GHz. Measured using an Agilent 86100C 33 GHz DCA. Single-ended 550 mV data and 400 mV clock inputs. Timing Diagram High Speed Logic - SMT tSH = Setup and Hold Time CPM = Clock Phase Margin = 360° Truth Table Input H - Positive Difference Voltage L - Negative Difference Voltage For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone:...

Abrir o catálogo na página 6

MICROWAVE CORPORATION voi.oen 28 GBPS, D-TYPE FLIP-FLOP wl PROGRAMMABLE OUTPUT VOLTAGE Absolute Maximum Ratings [1] Max peak reflow temperature of 260 °C For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

Abrir o catálogo na página 7

MICFOA/AVE CORPORATION voi.oen EARTH FRIENDLY 28 GBPS, D-TYPE FLIP-FLOP wl PROGRAMMABLE OUTPUT VOLTAGE Interface Schematic Signal Grounds Differential Data Inputs: Current Mode Logic (CML) referenced to positive supply Differential Data Outputs: Current Mode Logic (CML) referenced to positive supply. Supply Ground Output level control. Output level may be increased or decreased by applying a voltage to VR per 'Output Differential vs. VR" plot. This pin and the exposed paddle must be connected to the negative voltage supply. For price, delivery and to place orders: Hittite Microwave...

Abrir o catálogo na página 8

28 Gbps, D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE High Speed Logic - SMT List of Materials for Evaluation PCB 125614 [1] Item HMC853LC3 High Speed Logic, D-Type Flip-Flop [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed metal package base must be connected to Vee. A sufficient...

Abrir o catálogo na página 9

EARTH FRIENDLY 28 GBPS, D-TYPE FLIP-FLOP wl PROGRAMMABLE OUTPUT VOLTAGE Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

Abrir o catálogo na página 10