ADL5246
1 / 32Páginas

Excertos do catálogo

3 GHz Variable Gain LNA with Integrated ½ W Driver Amplifier ADL5246 Data Sheet FEATURES GENERAL DESCRIPTION RF output frequency range: 0.6 GHz to 3 GHz Output IP3: 37 dBm at 2.2 GHz Output P1dB: 28 dBm at 2.2 GHz Noise figure of input amplifier: 1 dB at 2.2 GHz Maximum gain: 31.5 dB at 2.2 GHz Voltage variable attenuation range: 45 dB 0 V to 3.3 V attenuation control range Integrated bypass switch for low noise VGA Matched 50 Ω input stage 3.3 V to 5 V single supply 32-lead, 5 mm × 5 mm LFCSP package The ADL5246 is a high performance, low noise variable gain amplifier (VGA) optimized for multistandard base station receivers and point to point receive (Rx) and transmit (Tx) applications. The low noise figure and excellent linearity performance allow the device to be used in a variety of applications. The device consists of a low noise amplifier, a high linearity VGA, and a ½ W output driver stage. The variable attenuator networks are optimized to provide high linearity performance over the 45 dB gain control range. Gain is set using a unipolar control voltage from 0 V to 3.3 V. The output stage of the ADL5246 is an externally tuned ½ W driver amplifier, which allows the device to be optimized anywhere between the 0.6 GHz to 3 GHz range, with an average tuning bandwidth of 200 MHz wide. An external filter can be used between the VGA and the final driver amplifier. The ADL5246 can be biased between 3.3 V and 5 V to trade-off between performance and power consumption. APPLICATIONS Multistandard radio receivers Point to point Rx and Tx Instrumentation Military and aerospace The ADL5246 is fabricated on an advanced GaAs process. The device is available in a 32-lead, RoHS-compliant, 5 mm × 5 mm LFCSP and thermally rated to operate over the −40°C to +105°C temperature range. FUNCTIONAL BLOCK DIAGRAM Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2014 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com

Abrir o catálogo na página 1

Data Sheet REVISION HISTORY 4/14—Revision 0: Initial Version

Abrir o catálogo na página 2

Data Sheet SPECIFICATIONS VPOS = 5 V, TA = 25°C, unless otherwise noted. Amplifier 1 = AMP1, Amplifier 2 = AMP2, and Amplifier 3 = AMP3. Table 1. Parameter OVERALL FUNCTION Frequency Range AMP1 FREQUENCY = 0.75 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure AMP1 FREQUENCY = 0.9 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure AMP1 FREQUENCY = 1.5 GHz Gain vs. Frequency vs....

Abrir o catálogo na página 3

ADL5246 Parameter AMP1 FREQUENCY = 2.2 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure AMP1 FREQUENCY = 2.6 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure AMP2 FREQUENCY = 0.75 GHz Gain vs. Frequency vs. Temperature Gain Range Input Return Loss Output Return Loss Input 1 dB Compression Point Input Third-Order Intercept Noise Figure AMP2 FREQUENCY = 0.9 GHz Gain vs....

Abrir o catálogo na página 4

Data Sheet Parameter AMP2 FREQUENCY = 1.9 GHz Gain vs. Frequency vs. Temperature Gain Range Input Return Loss Output Return Loss Input 1 dB Compression Point Input Third-Order Intercept Noise Figure AMP2 FREQUENCY = 2.2 GHz Gain vs. Frequency vs. Temperature Gain Range Input Return Loss Output Return Loss Input 1 dB Compression Point Input Third-Order Intercept Noise Figure AMP2 FREQUENCY = 2.6 GHz Gain vs. Frequency vs. Temperature Gain Range Input Return Loss Output Return Loss Input 1 dB Compression Point Input Third-Order Intercept Noise Figure AMP2 GAIN SETTLING Minimum to Maximum Gain...

Abrir o catálogo na página 5

ADL5246 Parameter AMP3 FREQUENCY = 2.2 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure AMP3 FREQUENCY = 2.6 GHz Gain vs. Frequency vs. Temperature vs. Supply Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure FULL CHAIN FREQUENCY = 2.2 GHz Gain vs. Frequency Gain Range Input Return Loss Output Return Loss Output 1 dB Compression Point Output Third-Order Intercept Noise Figure LOGIC INPUTS Logic Level Low Logic Level High...

Abrir o catálogo na página 6

Data Sheet ABSOLUTE MAXIMUM RATINGS Supply Voltage, Vpos Maximum RF Input Level (AMP1) Internal Power Dissipation Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Lead Temperature Range (Soldering 30 sec) Human Body Model (HBM) ESD Rating Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum...

Abrir o catálogo na página 7

Data Sheet PIN CONFIGURATION AND FUNCTION DESCRIPTIONS NOTES 1. NIC = NO INTERNAL CONNECTION. 2. THE EXPOSED PADDLE (EP) MUST BE SOLDERED TO A LOW IMPEDANCE GROUND PLANE. Description Ground. The exposed paddle (EP) and ground pins must be soldered to a low impedance ground plane. RF Input. This pin requires a dc blocking capacitor. Use a 100 pF capacitor for normal operation. No Internal Connection. These pins are not connected to internal circuitry. The user may optionally solder to a low impedance ground plane for grounding, shielding, and printed circuit board (PCB) trace impedance...

Abrir o catálogo na página 8