Catálogos >
ADVANTECH >
EKI-1228/CI/I-DR

EKI-1228/CI/I-DR
1 / 2Páginas

Excertos do catálogo

8-port Modbus Gateway Features Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy Integration of Modbus TCP and Modbus RTU/ASCII networks Supports up to 921.6 kbps, and any baud rate setting Support up to 16 connections on each serial port under Modbus Master mode and 128 sessions under Modbus Slave mode. Software selectable RS-232/422/485 communication (RS-422/485 for "CI" model) Mounts on DIN-rail and Wall mount Built-in 15 KV ESD protection for all serial signals Automatic RS-485 data flow control Supports surge protection for D.C. power ports with line to line 2 KV, and line to earth 4 KV; for signal ports with 4 KV. 'I' models support a wide operating temperature 'CI' models support isolation and wide operating temperature Introduction The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based devices. The EKI-1228 has two independent Ethernet ports and MAC addresses to provide redundancy and reliability. They provide a simple and cost-effective way to bring remote management and data accessibility to thousands of devices that cannot connect to a network. EKI-1228 provides a feature that can allow users to select master or slave operation mode for each serial port. They not only allow an Ethernet master to control serial slaves, but also allow serial masters to control Ethernet slaves. Specifications Ethernet Communications Compatibility Speed No. of Ports Port Connector Protection IEEE 802.3, IEEE 802.3u 10/100 Mbps 2 8-pin RJ45 Built-in 1.5 KV magnetic isolation Serial Communications Port Type No. of Ports Port Connector Data Bits Stop Bits Parity Flow Control Baud Rate Serial Signals Utility Software Operation Modes Configuration Protocols RS-232/422/485, software selectable ("CI" mode supports RS-422/485) 8 DB9 male 5, 6, 7, 8 1, 1.5, 2 None, Odd, Even, Space, Mark XON/XOFF, RTS/CTS, DTR/DSR 50 bps ~ 921.6 kbps, any baud rate setting RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485: Data+, Data-, GND Built-in 15 KV ESD for all signals Dimensions (W x H x D) 86.6 x 140 x 95 mm (3.41" x 5.51" x 3.74") Enclosure Metal with solid mounting hardware Mounting DIN-rail, Wall Weight EKI-1228/I: 900g, EKI-1228CI: 1000g System: Power, System Status/LAN: Speed, Link/Active Serial: Tx, Rx Power Requirements Input Connector Consumption 12 ~ 48 VDC, redundant dual inputs Terminal block EKI-1228/I: 5W EKI-1228CI: 6W Environment Operating Temperature EKI-1228-DR: -10 ~ 60°C (14 ~ 140°F) "CI" & "I" mode: -40 ~ 70°C (-40 ~ 158°F) Storage Temperature -40 ~ 85°C (-40 ~ 185°F) Operating Humidity 10 ~ 95% RH Regulatory Approvals EMC CE, FCC Part 15 Subpart B (Class A) Windows XP/7/8.1/10, Windows Server 2003/2008/2012/2016/2019, and Linux Advantech EKI Device Configuration Utility Modbus RTU Master/Slave mode Modbus ASCII Master/Slave mode Windows Utility, Web Browser ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, HTTP, DNS, SMTP, ARP, NTP Industrial Wireless and Protocol Gateway Solutions

Abrir o catálogo na página 1