SlimLine XR
1 / 52Páginas

{{requestButtons}}

Excertos do catálogo

SlimLine XR - 1

SlimLine XR Switch Disconnector Fuse 63-630 A

Abrir o catálogo na página 1
SlimLine XR - 3

Product overview Ordering information

Abrir o catálogo na página 3
SlimLine XR - 6

Easy to install The use of plug-in contacts at the distribution busbars, an integrated slide support and increased cable termination area makes the installation easy and time saving. SlimLine XR can be installed in horizontal or vertical direction. The concept of these kind of switches allows more outgoing feeders per switchboard saving cubicle, floor space and costs. The SlimLine XR can even be removed and replaced in a switchboard with live busbars. Continuous operation The Intelligent Tier Switch ITS2.1 and ITS2.D is the optimal solution for Energy Management systems to analyze, optimize...

Abrir o catálogo na página 6
SlimLine XR - 7

The latest within optimal operation and design The SlimLine XR fulfils all increasing demands in the industry for safe energy distribution. Installation of the SlimLine XR is even easier and more time saving than ever before. The increased space in the cable termination area will allow better access for the cable installation. Motor operation SlimLine XR offers an integrated motor (as option) for remote or local operation. The motor operation unit is 100% integrated inside the SlimLine XR. The front operated ON / OFF buttons are shrouded by a transparent cover with padlocking facility. —...

Abrir o catálogo na página 7
SlimLine XR - 8

8 SLIMLINE XR SWITCH DISCONNECTOR FUSE 63-630 A Applications: • Distribution boards • Building industry • Oil and Gas industries • Data centers • Hospitals • Airports • Banks • Shopping centers • In combination with Motor Control Centers • When using emergency power supply • Photovoltaic Power Plants

Abrir o catálogo na página 8
SlimLine XR - 9

Electronic fuse monitoring (EFM) • # • • Intelligent Tier Switch ITS2.1/2.D • # • • Auxiliary switch • • • • Multiplug • # • • Ammeter • # • • Current transformers (CT) integrated • • • • Terminal extention for CT's integrated • # Current transformers (CT) • # • • with contact extention Cable shroud • • • • V-clamp • • • • Contact extention • • • • SlimLine Cassette • • • •

Abrir o catálogo na página 9
SlimLine XR - 11

Product overview 012 - 014 Assembly 015 Busbar Section Switch 016 - 017 Electronic Fuse Monitoring

Abrir o catálogo na página 11
SlimLine XR - 12

— Product overview Assembly XR00, 160 A 1. Front cover key 2. Cable terminal key 3. A-meter 4. Electronic fuse monitoring, EFM 5. A-meter bracket 6. Contact extensions 7. Cable clamp 8. Cable terminal shroud

Abrir o catálogo na página 12
SlimLine XR - 13

XR1, 250 A 1. Front cover key 2. Cable terminal key 3. A-meter 4. Electronic fuse monitoring, EFM 5. A-meter bracket 6. Contact extension 7. Cable clamp 8. Cable terminal shroud 9. Terminal cover

Abrir o catálogo na página 13
SlimLine XR - 14

— Product overview Assembly XR2/3, 400-630 A 1. Front cover key 2. Cable terminal key 4. A-meter 5. Electronic fuse monitoring, EFM 6. Contact extensions 7. Double cable clamp 8. Cable terminal shroud 9. Auxiliary switch 10. Multi plugs 11. A-meter bracket

Abrir o catálogo na página 14
SlimLine XR - 15

— Product overview Busbar Section Switch XR-SS/SP XR-SS/SP Switch disconnector fuse switch can sectionalize tow parallel (SP) or serial (SS) busbar systems. It can be used with DIN Fuse size 3. The XR-SS/SP has and Utilization category of AC23B, 690V, 630A. This product includes two ventilated blind covers. XR is available for the following busbar phase distances 50 mm distance between phases, 5 mm busbar 185 mm distance between phases, 10 mm busbar

Abrir o catálogo na página 15
SlimLine XR - 16

— Product overview Electronic Fuse Monitoring (EFM) The SlimLine XR EFM gives an alarm at any fault conditions if a fuse is blown. An internal potential free relay (1NC+1NO) will trip to transfer a ­ signal for a remote fuse blown alarm. The EFM unit is self supplied, which means no additional power supply is required. Fuse status Relay contacts Green LED Relay contacts Fuses BLOWN Fuses BLOWN

Abrir o catálogo na página 16
SlimLine XR - 17

Diagram XR AC EFM Diagram XR DC EFM Q1. Switch disconnector Fuse K1: Electronic Fuse Monitor (EFM) V1: Fuses OK V2: Fuse(s) blown X1: Multiplug terminals Q1. Switch disconnector Fuse K1: Electronic Fuse Monitor (EFM) V1: Fuses OK V2: Fuse(s) blown X1: Multiplug terminals

Abrir o catálogo na página 17
SlimLine XR - 18

SLIMLINE XR SWITCH DISCONNECTOR FUSE 63-630 A Product overview Intelligent Tier Switch ITS2.1 and ITS2.D The SlimLine XR ITS2.1 and ITS 2.D (with integrated Display) is developed for easy set up, reliable remote control, and monitoring via bus communication. SlimLine XR ITS2.1: which data can be monitored Features Line Voltage (V AC) Phase Voltage (V AC) Current (A) Active power (kW) Reactive power (kVA) Power factor (PF) Energy (kWh) Fuse status (EFM) Temperature (°C) Switch position Motor Control Communication bus Protocol Configurable Modbus RTU parameters...

Abrir o catálogo na página 18
SlimLine XR - 19

SlimLine XR ITS2.1/2.D features • Easy to set up via the software tool Ekip Connect • Reliable remote monitoring via bus communication • Serial bus communication via Modbus RTU / RS485 • With integrated Motor operator, it is possible to configure automatically when a fuse is blown. • ITS2.1 can be extended with the Ekip Display later > ITS2.D. • ITS2.D has the Ekip Display factory fitted SlimLine XR ITS2.D display menues Available in a wide range of variant: The new ITS2.1/2.D modules are delivered fully integrated in the SlimLine XR device for DIN NH Fuses or BS Fuses. • XR-M 3 pole...

Abrir o catálogo na página 19
SlimLine XR - 20

— Product overview Motor operation (MOT) SlimLine XR offers an integrated motor for remote and ­ocal operation. l ­ The motor operation unit is 100% integrated without any changes of ­ external dimensions. The front operated ON/OFF buttons are shrouded by a ­ ransparent cover with padlocking facility. t Q1. Switch disconnector Fuse K1: Electronic Fuse Monitor (EFM) V1: Fuses OK V2: Fuse(s) fail(ed) X1: Multiplug terminals S1: Close S2: Open EFM Common Switch position feedback NO(*) Switch position feedback NO(*) Field Open Field Close Field Common +24V 0V C ontact follow main contact. Will...

Abrir o catálogo na página 20

Todos os catálogos e folhetos técnicos ABB Smart Power

  1. Bus couplers

    3 Páginas

  2. SACE Emax 2

    277 Páginas

  3. TruOne

    68 Páginas

  4. Switch-disconnectors

    192 Páginas

  5. OFAM/ OFAA

    2 Páginas

  6. SACE Tmax XT

    8 Páginas

  7. YO-YC Test unit

    5 Páginas

  8. Pacific Intertie

    2 Páginas

  9. ABB Division

    17 Páginas

  10. ABB HVDC Classic

    24 Páginas

  11. V400

    2 Páginas

  12. V16

    2 Páginas

  13. P42E

    2 Páginas

  14. Nightstar

    2 Páginas

  15. ROYCE THOMPSON

    4 Páginas

  16. EasyLine XLP

    31 Páginas