Model TIO - I/O monitor/controller catalog page(s)
1 / 5Páginas

{{requestButtons}}

Excertos do catálogo

Model TIO - I/O monitor/controller catalog page(s) - 1

TOTALIZER INPUT/OUTPUT FLOW MONITOR/CONTROLLER Displays instantaneous, total and accumulated flow rates. Built-in Flow Linearizer (10 point linearization of the flow curve). Up to 47 different volumetric and mass flow engineering units. Large 13mm (0.51") digits for flow rate and 5.5mm (0.21") for Total. Digital RS-232 or RS-485 interface (multi-drop capability of up to 64 devices.) Compact design for unit mount, panel mount, wall mount or field mount applications. User-programmable, optically-isolated pulse output. Two programmable, optically-isolated, digital outputs. Flow controllers, set point command control via local LCD or digital interface. Programmable set point table with ramping up/down capability up to 16 steps. Free Configuration and Monitoring Utility software. www.aalborg.com - e-mail ౧ info@aalborg.com - ( 845.770.3000 - fax 845.770.3010 - Toll Free in U.S.A. and Canada 1.800.866.3837 26

Abrir o catálogo na página 1
Model TIO - I/O monitor/controller catalog page(s) - 2

TOTALIZER INPUT/OUTPUT FLOW MONITOR/CONTROLLER Applications For flow meters and controllers with analog 0-5 (5-10) (0-10)Vdc, 420mA input output interface, where flow indications / control and totalizers or alarm functions are required. Also when re-transmission of the flow rate and/or totalizer functions via optically-isolated pulse output or serial communication is desired. Local or programmable set point control for flow controllers (no host PC presence required). Activation of user-supplied equipment via programmable optically-isolated digital outputs when flow alarms or totalizers...

Abrir o catálogo na página 2
Model TIO - I/O monitor/controller catalog page(s) - 3

TOTALIZER INPUT/OUTPUT FLOW MONITOR/CONTROLLER Programmable Alarms TIO provides the user with a flexible alarm/warning system that monitors the fluid flow for conditions that fall outside configurable limits as well as visual feedback for the user via the LCD or via an optically-isolated output. The flow alarm has several attributes which can be configured by the user via LCD/Keypad or digital communication interface: n n n n n Enable/Disable flow alarm. Low flow alarm settings (in % of full scale). High flow alarm settings (in % of full scale). Flow alarm action delay. Flow alarm action...

Abrir o catálogo na página 3
Model TIO - I/O monitor/controller catalog page(s) - 4

TOTALIZER INPUT/OUTPUT FLOW MONITOR/CONTROLLER ACCESSORY'S Note: X - represent the length of the cable in feet | www.aalborg.com - e-mail El info@aalborg.com 845.770.3000 - fax 845.770.3010 - Toll Free in U.S.A. and Canada 1.800.866.3837

Abrir o catálogo na página 4
Model TIO - I/O monitor/controller catalog page(s) - 5

ORDERING INFORMATION FOR TOTALIZER FLOW MONITOR / CONTROLLER MODEL DISPLAY / KEYPAD N No Display / No Key Pad L LCD / Key Pad INPUT SIGNAL A 0-5 VDC B 4-20 mA C 0-10 VDC D 5-10 VDC OUTPUT SIGNAL A 0-5 VDC B 4-20 mA 0-10 VDC C DIGITAL INTERFACE 2 RS-232 RS-485 5 Totalizer I/O Flow Monitor / Controller with LCD Key Pad, 0-5 VDC Input, 0-5 VDC Output and RS-232 Digital Interface. www.aalborg.com - e-mail ౧ info@aalborg.com - ( 845.770.3000 - fax 845.770.3010 - Toll Free in U.S.A. and Canada 1.800.866.3837 30

Abrir o catálogo na página 5

Todos os catálogos e folhetos técnicos Aalborg Instruments

  1. Valve catalog

    16 Páginas

  2. DPC

    6 Páginas

  3. Rotameter Catalog

    74 Páginas

  4. CALIBRATIONS

    13 Páginas

  5. S meter

    3 Páginas

  6. T / Tx meter

    5 Páginas

  7. P / Px meter

    5 Páginas

  8. Pump Catalog 2015

    33 Páginas

  9. Kits

    1 Páginas

  10. SDPROC

    4 Páginas

  11. PSV-PSVD

    5 Páginas

  12. DFM

    6 Páginas

  13. DFC

    8 Páginas

  14. XFM

    6 Páginas

  15. GFM

    5 Páginas

  16. VX

    21 Páginas