
Grupo: 4B Group

Excertos do catálogo

Product DATASHEET Datasheet PRODUCT Rub block, Inspection Door, Gasket, Shim, Bolts and Washers. Brass rub blocks monitor for belt misalignment problems on bucket elevators and conveyors by detecting heat generated by the friction of the misaligning belt rubbing against the brass. A temperature sensor within the brass block provides the temperature reading and the system generates an alarm and a shutdown when a trip point is reached. The sensors are usually installed in pairs on opposite sides of the machine to detect misalignment on either side. Sensors can be connected directly to a PLC input, or for greater safety, to a central independent monitoring system such as 4B’s T500 Elite Hotbus™, Watchdog™ Super Elite or T400N Elite Hotswitch. Inspection doors are available to assist with periodic maintenance and testing of the brass rub block and system. Misalignment Monitoring Installation ► No Moving Parts (Solid Brass Block) ► Easy Installation ► Temperature Activated (Friction) ► External Sensor Testing with use of the ADB Tester (ADBT4) ► Easy (full kit assembly) – Rub block only, rectangular 2” W x 4” L, use with 1/8” NPT temp sensor ADB2 series. ► RB2W4LR2-SHIM - Rub Block shim for RB2W4LR2 ► RB2W4LR2-BOLTS - 1/4-20 Brass bolts for RB2W4LR2 ► RB2W4LR2-SPLIT-LOCK - 1/4 SS split lock washers ► RBID3X9-DOOR - Rub block inspection door, stainless steel ► RBID3X9-GASKET - Rub Block gasket ► RB2W4LR2-BLOCK APPLICABLE ADB SENSORS - 1/8"BSPT, 4-20mA, 3m cable, 50mm probe, ATEX Zone 20/IECEx/UKEx ► ADB20V3CAI/D2 - 1/8" NPT, conduit entry, NTC, 3m PVC cable, 50mm probe, CSA/ATEX Zone 20/IECEx/UKEx ► ADB29V3CAI/D2 - 1/8" NPT, conduit entry, PT100, 3m PVC cable, 50mm probe, CSA/ATEX Zone 20/IECEx/UKEx ► ADBMIL1V4C/D2 - 1/8" NPT, conduit entry, 4-20mA, 2m cable, 50mm probe, CSA ► ADB91MV3AI/D2 Copyright © 2024 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. REV09
Abrir o catálogo na página 1
Product DATASHEET Datasheet PRODUCT Rub Block Kit WIRE DESCRIPTION Copyright © 2024 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. REV092324
Abrir o catálogo na página 2Todos os catálogos e folhetos técnicos 4B Braime Components
-
MDB bearing temperature sensors
2 Páginas
-
WDB8 Bearing Temperature Sensors
2 Páginas
-
WDB2 Bearing Temperature Sensors
2 Páginas
-
RG4 Rotary Level Sensor
6 Páginas
-
4B ATEX Junction Boxes
1 Páginas
-
Milli-Vib - Vibration Sensor
2 Páginas
-
4B Grain & Feed Industry Solutions
12 Páginas
-
4B Universal Speed Relay (USR)
2 Páginas
-
4B Cement Industry Solutions
8 Páginas
-
4B VIBMIL vibration sensor
2 Páginas
-
RG2 Rotary Paddle Level Indicator
6 Páginas
-
RG3 Rotary Level Sensor
7 Páginas
-
RLI - Rotray Paddle Level Indicator
2 Páginas
-
4B elevator buckets
17 Páginas
-
Millispeed - Shaft underspeed switch
3 Páginas
-
Elevator Bolts
5 Páginas
-
4B Elevator Belting
11 Páginas
-
RLI Shaker - Rotary Level Indicator
2 Páginas
-
P300 - Inductive Proximity Sensor
3 Páginas
-
WDB1 Bearing Temperature Sensors
2 Páginas
-
Vise Splice Elevator Belt Joiners
1 Páginas
-
EASIFIT Elevator Bolts
1 Páginas
-
FANG Elevator Bolts
1 Páginas
-
Reference 70 Elevator Bolts
2 Páginas
-
Euro Bolt
1 Páginas
-
4B Sugar Mill Chains
24 Páginas
-
JUMBO CC-S Elevator Buckets
2 Páginas
-
ADB bearing temperature tester
2 Páginas
-
AUE400 - Rotation Control Module
2 Páginas
-
Double and triple forged chain links
1 Páginas
-
P800 - Inductive Proximity Sensor
2 Páginas
-
4B Rotech Encoder
2 Páginas
-
4B Tacho
2 Páginas
-
X400 Alarmswitch
2 Páginas
Catálogos arquivados
-
RG1 - Rotary Paddle Level Indicator
4 Páginas
-
4B Level Indicators
7 Páginas
-
4B Speed Switches & Shaft Encoders
5 Páginas
-
M100 Stopswitch
2 Páginas
-
Slack Chain Detection
1 Páginas
-
4B explosion vent panels
1 Páginas
-
M300 Slipswitch
2 Páginas