Catálogos >
4B Braime Components >
4B Touchswitch - Belt & Pulley Misalignment Sensor

4B Touchswitch - Belt & Pulley Misalignment Sensor
1 / 2Páginas

Excertos do catálogo

4B Touchswitch - Belt & Pulley Misalignment Sensor - 1

Product Datasheet PRODUCT DATASHEET TOUCHSWITCH TOUCHSWITCH Belt Misalignment Sensor APPLICATION The Touchswitch is an electro-mechanical limit-switch with no moving parts, that detects the misalignment of both pulleys and belts in conveyors and bucket elevators. The sensor detects the lateral force of the belt or pulley and activates a voltage free relay contact. This relay contact can be used to send an alarm or shutdown the machine. The sensors are usually installed in pairs on opposite sides of the belt / pulley. The sensors can be connected directly to a PLC input, or for greater safety, to a central independent monitoring system, such as the IE-NODE, B400 Elite or the Watchdog Elite. U.S. Patent # 6,731,219 Other Patents Pending FEATURES ►Hardened Stainless Steel Sensor Face ►Not affected by dust or material built up ►External Test Function ►Not a “Rub” Block ►NEMA 4X, IP66 Rated ACCESSORIES ►TS-CORE-DRILL-57MM - Core drill and Arber, 57mm diameter, steel ►TS-MOUNT-4 - Mounting bracket - 4 studs Part Number Supply Voltage Conduit Entry Conduit Entry Conduit Entry Conduit Entry Conduit Entry WATCHDOG ELITE COMPATIABLE CONTROL UNITS Connect the Touchswitch directly to a PLC, or use with the optional IENODE, B400 Elite and Watchdog Elite digital monitoring systems for conveyors or bucket elevators. Belt alignment, belt speed, bearing temperature, pulley alignment, and plug condition monitoring in one complete standardized system. Copyright © 2024 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. REV11142024

Abrir o catálogo na página 1

4B Touchswitch - Belt & Pulley Misalignment Sensor - 2

Product Datasheet PRODUCT DATASHEET TOUCHSWITCH Technical Specifications Supply Voltage Supply Current Solid State Relay 240Vac/Vdc, 50mA Non-inductive Volt-Free Contact Relay 250Vac, 5A Non-Inductive Sensor State Indication Red LED Indicated Power ON/NO Alarm for TS2V4CAI & TS2V3CAI & Green LED for TS2V34AI. 6 Core; 3 Meter Long Sensor Face Hardened Annealed Stainless Steel Sensor Body Pressed Seamless Steel with Epoxy Paint Fixing Centres Test Wheel Bucket Elevator Application Enclosed Belt Conveyor Application Open Belt Conveyor Application Copyright © 2024 4B Group. All rights reserved....

Abrir o catálogo na página 2