Product InformationMaterial Testing Machine zwickiLine Z2.5 TN+ PI 595 1220 CTA: 222531 233359 Applications The zwickiLine Z2.5 TN+ materials testing machine is a powerful, flexible testing solution for a wide range of demanding test situations. The materials testing machine is ideally suited for high-precision test requirements and for research and development purposes. The zwickiLine Z2.5 TN+ is also the perfect solution for test tasks under cleanroom conditions. It can be used in the areas of production and testing in cleanroom class 5. Due to its special technical properties, the zwickiLine Z2.5 TN+ is ideal for testing of metals, springs, composites, medical components, and for instrumented indentation testing for hardness determination. The high acceleration rate and crosshead speed provide the optimal conditions, for example, to simulate the behavior of the spring in an autoinjector with the crosshead during a spring simulation test for medical autoinjectors. CERTIFICATE The COLANDIS GmbH certifies ZwickRoell GmbH & Co. KG August-Nagel-Strasse 11 89079 Ulm a cleanroom suitability according to the DIN EN ISO 14644 1:2016-06; DIN EN ISO 14644-14 and VDI 2083-9.1 for Operation condition Dynamic condition at all relevant points This certificate is limited to the cleanliness of airborne particles. The product has been tested according to VDI 2083 Page 9.1 and DIN EN ISO 14644-14. Related report: 204935-2 Date of report: 07.05.2020 U.J^f Matthias Hacking zwickiLine Z2.5+ cleanroom certificate Advantages and features The technical properties of the zwickiLine Z2.5 TN+ significantly differentiate it from the zwickiLine. It provides sophisticated possibilities for applications with increased test requirements. • A powerful wear-free AC motor enables a high crosshead speed of 3000 mm/min over the entire force range up to 2.5 kN. • High resolution of the crosshead movement of 0.95 nm and superb speed accuracy with 18 pm/min, deliver reliable test results even at very slow test speeds and short test travel distances in the pm range. • The stiffness is four times higher than for a regular zwickiLine Z2.5, which also allows for testing of very stiff specimens without an additional extensometer.

The zwickiLine Z2.5 TN+ can be used in the areas of production and testing in cleanroom class 5 to DIN EN ISO 14644-1. • The testing machine can be directly integrated into the production process in the cleanroom (e.g. insulin pen testing). This ensures product quality. • Testing can take place directly at the specimen removal location, without the time consuming transfer of specimens from the cleanroom. This saves a significant amount of time while maintaining the same level of quality. • Biological specimens can be tested without contamination. Option DIN EN ISO 13849 satisfies the following...

Technical data Type Z2.5 TN+Item No. 1039527 Test load Fmax 2.5 kN Test area Height, Pmin---Pmax (each without mounting stud) Moving crosshead mounted with angle up Moving crosshead mounted with angle down Depth Width Travel s of the moving crosshead, max. Load frame Dimensions Width with machine electronics Depth Depth with machine electronics Weight With machine electronics, approx. Average noise level at vmax measured at 1 m distance from the front of the machine Drive system Crosshead speed vmjn... vmax Drive travel resolution Power input specifications Power supply Power consumption (full...